Access to most types of information for a person at the present time is greatly simplified with the help of modern technology. For example, in order to have at hand a small library, enough to buy an e-book. However, the reader, as well as many other types of equipment, is not immune to failures and malfunctions. One of the most common problems that from time to time face owners of electronic reading devices, is the inability to turn the unit on. This article will discuss the main reasons due to which the reader may not start, and also provides tips for correcting problems.
Why does not the e-book
The content of the article
- Why does not the e-book
- What to do if you do not include electronic books
Traditionally experts divide the causes of the problems with the inclusion of e-books hardware and software. By the software may include:
- failures in the operating device;
- Fault memory card.
As for hardware reasons, these include:
- malfunction "charger";
- Fault inputs;
- nonworking battery device;
- fault power button;
- mechanical damage, exposure to either moisture or high temperature on the internal components of the device.
What to do if you do not include electronic books
If the reader does not turn on, the first thing is to make sure it is not low. When connected to the network is worth checking the integrity of the cable, connectors and serviceability input device. To know for sure that the cause lies not in the cable fault, it is necessary to try to charge the device with the help of another worker "charger".
If a charge is all right, it is worth to try to press and hold the power button for 15-20 seconds. In some cases, it helps the device to "wake up." If that does not work, you can try to press the reset button, which is located on one of the side panels of the book.
Important! Some manufacturers have intentionally reset button recessed to avoid accidental clicks it. Therefore, for pressing may require a sharp, thin object.
If the problem is in the memory card reader will be able to start without her. We should not throw away the faulty card, t. To. The return her performance can be formatted using any special software.
One of the most effective options to resolve software failure is the so-called Hard reset - restart feature deep with back to the settings established by the manufacturer. In order to produce such a restart, it is necessary to look into the device's user manual to find out the desired key combination.
Important! This type of reboot destroys all data on the device, but it does not affect the data stored on the memory card.
If "rigid reboot" did not make the reader to make money, then you can try it to flash. Sometimes the instructions for proper flashing is all in the same user's manual, but if there is it will not be able to find, you can try to look for such an instruction and necessary for rewriting software on the Internet, on the official website Manufacturer.