The popularity of xbox 360 gamepads can only be envied. Back in 2015, one of the largest game stores conducted statistics on which gamepads most often played by users. Statistics have shown that most often games are launched using xbox 360 joysticks. Of the 28 million users, some are constantly faced with the problem that the device starts unstable. Many are having serious problems turning on the joystick. The article will tell you how to turn on this device.
Turn on the joystick on xbox 360
The content of the article
- Turn on the joystick on xbox 360
- After turning on the joystick does not work
In order to enable the joystick on the console, you must click on the sync button. After the user holds this button for 30 seconds, you should then turn on the gamepad button.
Near the button that is responsible for powering the device, there is an icon that displays the connection to the console, or to a PC. If the device was turned on correctly, one of the icon sections will turn green.
Important! If an incorrect inclusion was made, the window will display a red color.
In order to connect the next gamepad, you must perform a similar operation on it.
After turning on the joystick does not work
In case the power indicator flashes red on the xbox 360, but the connection does not occur, you can consider all the possible causes of the incident. In most cases, you need to refer your console for repair to specialists.
First of all, you need to consider the room where the console is. There are situations when the included wireless equipment causes electromagnetic radiation, which prevents the synchronization elements from setting up their connection. If such a technique is still found, it is recommended to either turn it off or move it away so that there is no interference.
In addition, the possibility may lie in the problem of battery power. In this case, it is recommended to simply change the batteries, or charge it. To check, you just need to change the power supplies on each controller.
Reference! Also, many users can use a large number of joysticks at the same time. The xbox 360 itself allows you to connect up to 4 devices at a time.
Also, many gamers are unaware that there is no fundamental difference in the new or old device for games. Therefore, it is better to try to repair an old device than to purchase a new one.
How to troubleshoot
If the user didn’t manage to turn on one of the console’s joysticks independently, it is necessary to check the correct operation of the batteries. Conventional control devices have simple finger-type batteries that can simply run out of power.
It is also possible that the problem lies in the original batteries of the device. In order to avoid any problems with food, you should not buy the cheapest salt batteries. They discharge too quickly, which will prevent the user from using the xbox 360 control for quite some time.
It should be understood that the original battery from the xbox 360 is too weak. That is why you should stock up on more expensive and roomy batteries. Original batteries can only be used within 1200 mAh.
The best way to test one of the gamepads is this method:
- You must remove the original batteries from both gadgets.
- After that, swap.
- If nothing happened, it is highly recommended to contact a service center. It is possible that the reason lies in the damage to the power supply, or the failure of the device.
In addition, experts advise separately to purchase chargers that will help to escape from an unpleasant situation in the form of a discharge of the device.