When installing the emulator on a computer, you need to not only download the program, but also connect the appropriate controls to create a console effect. Dendy consoles use special joysticks with their own control circuit. They can be connected to a computer via a USB cable or synchronized via Bluetooth.
However, sometimes it happens that even with the right connection, the controller does not respond to keystrokes. In our article, we will talk about ways to configure and possible reasons for the lack of joystick operation.
Instructions: how to configure the dandy joystick
The content of the article
- Instructions: how to configure the dandy joystick
- What errors and difficulties arise during setup?
After you connect the joystick to the computer, it should become the main device for control in the emulator. If this does not happen, most likely it is incorrectly configured. To activate the controller, you need to perform the following steps:
- Check the connection of the joystick (in the case of the wireless version, charge it).
- Launch the Dendy emulator app.
- In the main menu, select Config. If this button did not appear on the main screen, you can right-click on any point on the screen and open a dialog box. In it, find the tab with the appropriate name.
- Usually, by default, an emulator uses a keyboard to control it. From the proposed list, select your controller to connect and activate.
- Now configure the digital work format for similar console settings.
- Additionally, you can adjust the vibration power in the corresponding section.
- In the key configuration window, edit the necessary commands and assign each button its own action in the game.
TIP: You can save the current settings or adjust them, adjusting to a new game. Try several options to choose the best one.
What errors and difficulties arise during setup?
The setup process does not take much time and is quite easy to perform. But sometimes users have difficulty connecting and configuring. Here is a list of some of them:
- Incorrect connection due to a mismatch in the controller format for a specific game.
- Mechanical damage and equipment failure.
- Lack of installed emulator program and its settings.
- When configuring commands, you can specify only one action for one button. When you press the key again, the last option is saved.
