Can I connect the dishwasher to the hot water?

Modern dishwashers facilitate the work and save time, our main resource. The only big negative - energy costs on heating water for washing dishes. Electricity today is not cheap, and there is a reasonable question - what if you do not heat the water in the dishwasher, and submit to it have hot water? Is this possible, and how to affect the operation of the machine? The pros and cons of this connection will be covered in the article.

The traditional way of water connection to the instrument

Most of the dishwashers in the world designed for connection to the water supply system with cold water, so this method of connection is considered to be traditional.

The operating instructions of the device is usually set out step by step connection process.

Probability tender to the dishwasher hot water supply

Connectivity is directly dependent on grade dishwasher - not all models can be connected to the hot water supply. When connecting the hose must use intended for hot water. He marked with are usually red stripe. And it's not even in the marking - for different hoses are used various materials to meet whatever requirements.

Nuances connect the hot water to the dishwasher

How to find out whether it is possible to apply hot water device

Before connecting the PMM to the water with the hot water, make sure the possibility of such an option - its admissibility should be written to the operating instructions of the device. For some models, there is also the option of a hybrid connectivity - once with two hoses.

Tools and materials needed

To work needed:

• high-temperature water hose;
• brass tee (not silumin) from the valve;
• coarse water purification filter;
• adjustable wrench, pliers, Teflon tape.

The sequence of the connection procedure,

Connection is made in the following order:

• cut off the water supply;
• prepare outlet water pipe;
• tee connected to the outlet pipe;
• tee to connect the water inlet hose;
• the free end of the hose to attach a strainer;
• connect the dishwasher to the water system.

security conditions

It should be remembered that there is always a high pressure hot water system. In any case not worth saving on the hose - it is fraught with emergency breakdowns. When connected, follow the instructions carefully seal the connection using Teflon tape. be sure to make a trial run and check for leaks before commissioning the unit into operation.

Attention! It is strictly prohibited to use the dishwasher without grounding! An electric shock.

Pros and cons dishwasher connection to hot water

question savings

Will it save money? Difficult question, and here's why:

• Allowable operating temperature in the dishwasher is not more than 70 degrees when it is exceeded may damage the filtration system.
• Definitely needs some coarse filter - in the hot water supply system a lot of dirt and debris.
• Rapid failure of hoses and gaskets due to exposure to high temperatures.

The only advantage is to reduce the energy consumption for heating water.

Extension of the service unit

As described above, to the dishwasher worked its warranty period, it can not be operated in emergency mode. If it fails, and the use of hot water supply system, could void the warranty. Ultimately, half kilowatt consumption during heating can be considerably cheaper.

Furthermore, when connecting the cold water, it is diluted special salt of the ion exchanger for greater softness. If you violate the temperature control system quickly fails.

Effect on dishwashing process

Quality bathing utensils especially does not change, because in the dishwasher has a thermostat, heats the water to a certain operating temperature. Is that the rise rate of the process due to the fact that there is no need for heating. Does it make sense to connect like a dishwasher - a moot point.