How to make decorative plaster, which can not be distinguished from the factory

As you know, people who want to save some amount of money resort to the manufacture of decorative plaster.

This plaster has several advantages. Breathability, one of its main advantages. In addition, such material perfectly hides the roughness of the walls. Also, decorative plaster is quite easy to wash when dirty.

As a rule, almost everyone can make such a plaster on their own. Such repairs will cost quite cheaply.

Preparation for work

First you need to clean the walls of the old layer of plaster. Next, you should use the building level to determine the evenness of the wall. If necessary, an additional layer of putty can be applied to the wall surface. At the last stage, the wall must be primed. After following all the above rules, you can apply the plaster.

For decorative plastering, special mixtures are necessary, which can always be purchased at any hardware store. There they are already sold as a ready-made solution. It is also not forbidden to make this mixture yourself using dry putty. For this purpose, you will need the most ordinary PVA glue. Just dilute the composition in water. This method, as a rule, will cost a person much cheaper.

Types of decorative plaster

• structural;
• textured.

Structural plaster

This type of plaster is made on the basis of cement. It is perfect for interior decoration. In addition, structural plaster practically does not smell and does not emit harmful chemicals. This property will be relevant for people who care about their own health. Such plaster is distinguished by a simple installation.

Structural plaster does not require perfectly even walls. This is perhaps one of its main advantages. This type of decorative material independently hides all the bumps and defects of the wall. Before applying the plaster, make sure that the wall is dry and primed. A week after carrying out such work, the plaster will finally dry.

Textured plaster

This type of decorative plaster requires proper application. It is made on the basis of a calcareous mixture. Textured plaster should only be applied on perfectly even walls. Otherwise, soon it will crack and become unusable.