Content
- 1 The advantages of branded "skates" Ondulin
- 2 Features of metal "skates"
- 3 Protective properties of "ondulin" and metal "skates"
When carrying out roofing, situations often arise related to the lack of component parts. It is not always possible to visit a hardware store or a market to buy fasteners, which is why many builders, especially beginners, have a sharp question about the possibility of replacing them.
To understand why professionals do not recommend replacing Ondulin's branded ridge elements with galvanized, it is necessary to carefully study the technical characteristics of the products, identify their advantages and limitations.
The advantages of branded "skates" Ondulin
These additional elements are distinguished by a large number of undeniable advantages.
It:
- Long term of operation;
- Increased strength;
- Resistance to aggressive external factors;
- Resistance to moisture, ultraviolet rays and other climatic conditions.
On average, the service life of branded ridge elements is more than 50 years. They must be mounted strictly following the manufacturer's instructions. Only in this case can it be guaranteed to protect the building structure and property located in the house from wind, snow and rain.
Features of metal "skates"
The ridge elements made of galvanized steel serve in 1,5 - 2 times less than "ondulin". This is because with prolonged exposure to moisture, steel undergoes destructive corrosion, and the structural strength is significantly reduced. Also, rust can affect parts of elements that have been damaged during transportation or installation.
Protective properties of "ondulin" and metal "skates"
Even with proper installation, condensate will accumulate on the inner surface of galvanized steel parts. It is a consequence of temperature changes. Ridge elements Ondulin are not subject to condensation.
Ondulin skates can be installed without building skills. When mounting parts made of galvanized steel, it is often required to use special tools, because the angles of the elements can differ significantly from the corners of the roof ridge.
Therefore, it is recommended not to use metal skates as an alternative. Such actions can lead to the fact that the work will need to be redone, and this will cause additional financial and time expenses.
-
Pros and Cons of Quartz Vinyl Tile
-
What are the disadvantages of PVC floor tiles
-
What are the hidden flaws in aerated concrete
-
The technology of facade insulation with foam
-
Linkrust: characteristics and technology of gluing
-
Properties and methods of using a waterproofing membrane
-
Characterization and use of glassizol in modern construction
-
Pipes that may burst due to frost
-
Polycarbonate Thickness for Home Greenhouse - Optimal Solution
-
How building mesh will help you avoid wall plaster troubles
-
Advantageous materials for wall cladding
-
Top reasons to abandon steel pipes in favor of plastic
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
