Which reinforcement is better: metal or fiberglass

Content

  • 1 The advantages of fiberglass reinforcement
  • 2 Cons of fiberglass reinforcement
  • 3 The advantages of metal reinforcement
  • 4 Summary

In the construction of the foundation necessary reinforcement. In addition to metal fittings, there is fiberglass. Many private developers are wondering: Which one is better?

Plastic is a brittle and combustible material. Fiberglass reinforcement is used in the construction of power lines, fences and bridges; during construction and repair work of the roadway, etc.

/

The advantages of fiberglass reinforcement

The main advantage is light weight. It weighs 5 times less than metal fittings. This facilitates its delivery and operation. For transportation, a length meter is not needed, since its release takes place in bays. It does not pass current and eliminates electromagnetic interference.
It is used under the influence of sea water, alkalis and acids. Differs in frost resistance and durability, keeps properties at a low temperature of 40º C and is not prone to corrosion.

instagram viewer
/

Cons of fiberglass reinforcement

Among the disadvantages are:

  1. The rod cannot be bent - for figured reinforcement, make a choice in favor of steel reinforcement.
  2. Not subject to welding - reinforcement rods are subject to bundle.
  3. Low temperature resistance - can withstand temperatures up to + 100 gr. With increasing temperature, melting occurs.
/

The advantages of metal reinforcement

The metal fittings are checked and are irreplaceable. It is used in reinforced concrete structures; in the construction of civil and industrial buildings; in the manufacture of a monolithic and heavy foundation of concrete; in buildings with increased lateral compression.

The advantages of metal reinforcement include resistance to external factors, strength, elasticity and excellent flexibility of the rod.

The disadvantages of metal fittings:

  • The main disadvantage is the tendency to corrosion;
  • Significant weight;
  • The fixed length of the metal rod is not more than 11.7 meters.
/

Summary

There is no single answer to the question of which type of reinforcement is better. The structural identity of the buildings and the operating conditions of the reinforcement greatly influence the choice of material. According to the recommendations of specialists for reinforcing walls and manufacturing an armored belt, fiberglass is an ideal option.

There is a decrease in the load on the foundation. The weight of the structure affects the installation of the foundation. For the construction of 2-story buildings and above, metal reinforcement is used, and, conversely, fiberglass is ideal for light buildings.

/

Cost affects the choice. It seems to some that fiberglass reinforcement is more expensive, but it is not. With the same strength, 1 option with a cross section is less than the second. As a result, the cost of equal materials in terms of parameters is the same.

  • Artificial acrylic stone in the interior: where and how to use itArtificial acrylic stone in the interior: where and how to use it
  • Wall decoration with flexible stoneWall decoration with flexible stone
  • What are the disadvantages of expanded clay as a heaterWhat are the disadvantages of expanded clay as a heater
  • Are there any benefits from energy-saving lamps and whatAre there any benefits from energy-saving lamps and what
  • What is the optimal thickness of the substrate for the laminateWhat is the optimal thickness of the substrate for the laminate
  • Where you can not apply glazing from soft PVC sheetsWhere you can not apply glazing from soft PVC sheets
  • Why knowledgeable people use copper pipes in the houseWhy knowledgeable people use copper pipes in the house
  • Plumbing seals: varieties, characteristics and applicationPlumbing seals: varieties, characteristics and application
  • Why the laminate may not snap during installationWhy the laminate may not snap during installation
  • Everything You Need to Know About Zinc PanelsEverything You Need to Know About Zinc Panels
  • What kind of flooring is not afraid of mechanical impactWhat kind of flooring is not afraid of mechanical impact
  • What consequences can there be if the laminate is laid in the kitchenWhat consequences can there be if the laminate is laid in the kitchen

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
How to make an original “curved” floor using a grooved board

How to make an original “curved” floor using a grooved boardMaterials

To perform high-quality laying of the wooden floor is not an easy task. However, it is greatly simplified by replacing an ordinary board with a grooved one. Due to the fact that the tongue and gro...

Read More
How to save on tile adhesive without sacrificing laying quality

How to save on tile adhesive without sacrificing laying qualityMaterials

Customers and finishers often face increased material consumption. For example, glue for tiles, which can cost decent money. Options for savings that do not entail negative consequences are real. ...

Read More
How to save on plaster by reducing its consumption

How to save on plaster by reducing its consumptionMaterials

Plastering walls during the repair of premises is one of the basic processes that are practically subject to to every beginning repairman, of course, taking into account the availability of the ne...

Read More