Content
- 1 Errors in the calculation
- 2 Marking selection
- 3 Installation Nuances
Corrugated board can be safely called universal building material. It is equally often used when installing the roof of the house, as well as for installing fences on the site. The material is of high quality, light weight, ease of installation and reliability. However, the main advantage that attracts consumers is its affordable cost.
Despite the ease of installation, many beginners can make typical mistakes. Therefore, it is worthwhile to carefully study the installation technology before starting work.
Errors in the calculation
At the initial stage, it is necessary to measure the roofing. After all, incorrect information can cause the acquisition of the missing amount of corrugated board. To correctly measure the roof area, you need to conduct two diagonal measurements. This is because most often roofs have not perfectly even parameters.
Also, when choosing a material, do not forget about the size of the overlap. It is better to trim the excess corrugated board than to buy material and mount it closely. In this case, the likelihood of leaks can increase dramatically.
Marking selection
Decking can be conditionally divided into two types - the carrier, used for the installation of roofing and universal, used for wall cladding and the installation of fences. The bearing type of material has large stiffeners, which allow it to withstand significant loads from wind, snow, rain, other weather phenomena and mechanical damage. At the same time, it is very important to correctly assess the climatic conditions in a particular region, because underestimating the strength of wind gusts can lead to moisture entering the roof and the formation of condensate.
In some cases, craftsmen can mount the roof using a universal type of corrugated board, but first they must evaluate the reliability of the lathing. Therefore, it is not recommended to purchase such material simply in order to save the budget.
Installation Nuances
When installing the roof, the corrugated board should be laid so that there are no gaps between its sheets. Therefore, the sheets need to be overlapped.
Gaps when installing the roof can occur due to improper joining of adjacent elements. Despite the fact that both sides of the corrugated board are similar in visual characteristics, one of them is the front, and the other is the opposite. This must be taken into account during the repair work.
-
What is the difficulty of gluing fiberboard to the walls
-
What are the disadvantages of PVC floor tiles
-
What are the disadvantages of expanded clay as a heater
-
What are the disadvantages of a polycarbonate roof
-
What tricks you need to know when choosing a brick for the fence
-
Which windows are better: plastic or wooden
-
Why is marmoleum the best flooring?
-
Why you should not replace the ondulin brand horse with a metal one
-
Why penetrating waterproofing the basement from the inside is not done
-
What to choose - pressed fittings or crimp fittings
-
In which cases it is impossible to add waste oil to bitumen
-
Beautiful ideas for applying liquid glass in the decor of an apartment
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
