Popular soundproofing methods for steel baths: foam.

A bathroom is an integral part of any house or apartment. This secluded place is in every home. Here, everyone can relax and be quiet after a hard day, so the room should be well equipped and protected. More recently, bathtubs were made of cast iron. This material is famous for its durability and good sound insulation. However today many companies make bathtubs made of steel and other materials that are lighter and have a stylish appearance. How to soundproof such a bath?

Steel bath features

A bath is a plumbing tank in which hygiene procedures are carried out. Also, it is possible to wash and do all kinds of chores in it.

Today the most steel models are popular. They are lighter, have a stylish appearance. In addition, they will last at least 20 years. To give brightness and smoothness, the container is covered with transparent enamel. A feature of such plumbing are:

• Ease. The weight of the steel bath is two times less than the cast-iron. Therefore, it can be easily transported and installed in any room.
• Large range of models. Steel is much more ductile than cast iron. Therefore, bathtubs of various shapes, sizes and colors are created from this material.
• Durable enamel coating. Such a surface will last a long time, and a beautiful appearance will please the owners for more than one year.

Remember! Although steel bathtubs are very practical and beautiful, they have several drawbacks: poor sound insulation and quick cooling. The steel bowl heats up quickly, but also cools quickly due to its high thermal conductivity. In addition, the noise when filling the bath causes considerable discomfort.

Popular soundproofing methods

There are many ways to reduce vibration - the cause of noise. This can be done at the installation stage or during operation. The choice of sound insulation method is up to you.

Polyurethane foam

The easiest way to soundproof - processing the bottom with foam. This method allows not only to get rid of noise, but also to increase the thermal insulation of the walls. If the bath is not connected, you need only turn it upside down. In the event that the plumbing is already connected, you need to turn off the water and dismantle the bath.

Before work, the bottom must be thoroughly cleaned of dust and dirt, after which the surface must be degreased with alcohol or a special solution. The holes must be protected with masking tape from foam. To ensure good adhesion to the surface, you must first apply a silicone mesh sealant, and then abundantly cover the entire surface of the bathtub with foam.

Foamed polyethylene

To soundproof the bowl with polyethylene, first disconnect it from the water supply and turn it over. Clean and degrease the surface. For better adhesion, you need to divide the plastic mats into several parts, and then stick the film tightly on the product.

Smooth the film well so that there are no bubbles. After the entire bowl is covered with a film, return it to its original position and connect to the water supply.

Now your plumbing is protected, and the sound of water will not interfere when filling the tank. And most importantly, you can avoid the appearance of mold and rust on the steel surface.

Other options

To eliminate noise and keep warm in the bath, it is not necessary to use only mounting foam or film. If you don't trust this material or prefer other isolation methods, take a look at a few more proven protection methods.

For this The following materials are used:

• Vibroizol. This material is sold in auto parts stores. It is designed for waterproofing cars. It has a rubberized base with an adhesive layer. It can also be used to protect steel bathtubs. Vibroizol easily glues to any surface, so it is fixed directly on the outside of the bowl.

• Technical traffic jam. It is made of cork oak. It is a very durable and environmentally friendly material. It does not rot and has no smell. High noise insulation and low thermal conductivity are the main advantages of technical plugs. In addition, the material is pre-treated with a non-combustible substance, this protects it from fire.
• Liquid acrylic. The material has high strength and good sound insulation. When applying liquid acrylic to the surface, there are no streaks or traces. Coverage will last at least 5 years. In addition, the acrylic bathtub looks beautiful and fits into any interior.

• Vibroplast. The material has a plastic structure. It is based on polymer glue. Vibroplast is an excellent soundproofing material that is suitable for any product. The material does not absorb moisture, does not rot and does not decompose. Therefore, it is often used to isolate plumbing.

Today in the market you can find a wide range of insulating materials for plumbing. This helps to quickly and efficiently insulate steel baths..

High-quality sound insulation helps not only to get rid of excess noise, but also to provide long-term service of plumbing. To ensure that the bathtub stays firmly in place and does not leak, fix it in the designated area with liquid nails or special silicone. This will help prevent water from leaking onto the floor and prevent mold.