How to remove scratches on an acrylic bath: how to avoid scratches on the bath

Many housewives have long appreciated the benefits of acrylic bathtubs. The products have an attractive appearance, are resistant to contamination, perfectly maintain the temperature of the water.

Acrylic bathtub requires gentle handling. However, even with all the operating standards, it is quite difficult to avoid the appearance of chips and cracks. Do not despair in the event of small defects - you do not need to buy a new bath, you can fix the damage yourself.

How to get rid of scratches on an acrylic bath

Acquiring and installing an acrylic bath is just the beginning. It is equally important to try to maintain its pristine appearance for a long time. But if this was not possible, you need to use a few tips.

Attention! Before proceeding with the removal of defects, thoroughly wash the entire surface of the bowl and then dry it.

Minor damage

Even minor damage must be repaired in a timely manner. Otherwise, with constant contact with the liquid, the surface of the sanitary ware will begin to deteriorate.

This will lead to the fact that the bath will have to be replaced with a new one.

Before proceeding with the removal of damage, prepare the surface:

1. Rinse the bowl with water.
2. Apply a small amount of detergent to the damaged surface. Leave it on for a few minutes.
3. Using a soft cloth, carefully clean the area where the detergent is applied.
4. Wash off the remaining cleaning agent with running water, then wipe the surface of the bowl dry.

You must also purchase the following:

1. Polish. You can buy a polish for plastic in the store of goods for motorists.
2. Sandpaper. A hardness option of 1200 and 2500 is needed.
3. Special pencil for acrylic surfaces.

To eliminate defects, you can use one of two options. The first is polishing damage. It is cheaper, but with frequent use, the thickness of the coating will decrease. The second is the filling of cracks and chips with a solution. It is more expensive, and the bathroom cannot be used for 24 hours.

Grinding damage is as follows:

• first, the surface is treated with “sandpaper” with a grain size of 1200;
• the second step - polishing with sandpaper with a hardness of 2500;
• the last stage - with a soft cloth soaked in polish, you must carefully wipe the treated surface.

For the second method, you will need to purchase a special repair kit. It includes a pencil, brush and one-component paint. The repair looks like this:

1. Using a brush, you should apply a composition that has the consistency of sour cream, with an even layer to the place of formation of the defect.
2. Apply paint to the treated surface. She should cover the bath until the scratches are completely aligned.
3. The bowl should be left for 24 hours.
4. After a day, the place of formation of the defect must be treated with sandpaper with a grain size of 2500 and thoroughly wiped with a soft cloth.

Deep scratches

Using a special kit for repairing acrylic surfaces, chips can be eliminated up to 2 mm deep. In composition it is a putty containing a large amount of acrylic.

Reference! Before you start fixing scratches, you need to buy a special composition and prepare the surface of the bowl.

To get rid of scratches, follow these steps:

1. The damaged area must be glued with masking tape.
2. Sand the area with 1200 grit.
3. Remove dust formed with a vacuum cleaner. Apply alcohol to the cloth and wipe the surface thoroughly.
4. Prepare the mixture. How to do this correctly is indicated in the instructions for the repair composition.
5. Using a rubber spatula, apply the solution evenly to the damaged area.
6. After 30 minutes, carefully remove the masking tape.
7. After 24 hours, use a “sandpaper” to sand the surface, and then wipe it with a soft cloth.

How to avoid scratching the bath

In order not to carry out such procedures regularly, after buying and installing an acrylic bath, follow a few simple recommendations:

1. Acrylic is a soft material, therefore, does not tolerate rough mechanical impact. To clean the bowl of the bath, use only mild cleaning products: creams, gels, pastes.
2. On sale you can find special tools for cleaning acrylic surfaces. Buy one and wash your bath or shower with it.
3. Drying water has a negative effect on acrylic. Therefore, after taking a bath, it is advisable to wipe the bowl with a soft cloth.
4. Hot objects can leave damage - try to avoid contact of the bowl with hot objects, for example, curling irons.
5. Do not let heavy or hard objects fall into the bathtub - this will damage the coating.
6. If a pet is washing in the bathroom, put a rubber mat on the bottom of the bowl.

The appearance of various defects on the acrylic bath is, of course, an unpleasant event, but not a scary one. After all, they can be eliminated on their own using inexpensive means. With careful use, you can avoid scratches in the future.