A shower cabin is convenient! Any owner of such a useful thing will say this. It takes up little space, which is especially important for a small room. There is practically no moisture left from it, it does not need to be intensively wiped off from dirt, like an ordinary bathroom.

But also shower cubicle also requires some care. If you abandon the plumbing box, it will quickly turn into a dirty and groomed item. And it will have to be painfully washed, remembering all the inhabitants of hell and their mothers.
Care Features
The content of the article
- Care Features
-
How to save a shower stall from soap scatters
- Vinegar
- Lemon and soda
- Ammonia
- Vodka with water
- Toothpaste
-
How to remove limescale
- Soda
- Soda
- Shop Facilities
- Melamine sponge
- Steam generator
The situation is complicated by the fact that the cabin itself consists of different materials that differ in the rules of processing and cleaning.
- Housing and doors are made plastic or glassbut.
- Herself shower head made of aluminum or chrome steel.
- Pallet is made made of acrylic, ceramic, cast iron or metaland, therefore, cleaning products will have to be selected different.

IMPORTANT! Acrylic, alcohol-containing products, abrasive materials are not suitable for acrylic. The same substances do not like cast iron and steel. And rigid scrapers will not please any material at all.
It is best to use special preparations for each surface or use universal remedies.. They may well be dishwashing liquid, laundry soap, soft sponges and rags, a variety of folk remedies.
In the shower stall, most often there are soap stains or limescale. The former are washed quite easily with clean water and a rag. And the second one can cause a lot of problems to the hostess. But we will teach how to maintain the cleanliness of our shower.
How to save a shower stall from soap scatters
So, soap scatters. Basically, if every time you wipe the walls of the cabin from droplets of soap foam, then the pollution simply will not have a chance of survival.

When this is not possible (or just laziness - it happens!), Then in the future you can use warm water and a rag. If the soapy footprint has already become noticeable, then vinegar, citric acid, soda and even toothpaste will come to the aid of the hostess.
Vinegar
It is necessary to dilute vinegar with ordinary water in a ratio of 1: 2. Then apply the resulting solution to the walls of the booth.

TIP! It is best to use a spray bottle. With its help, it quickly and efficiently processes the entire surface.
After 15 minutes, it is washed off with water and wiped with a clean, dry cloth.
Along the way, with the soap, limescale and salt deposits will depart, the metal elements will sparkle with a new force.
IMPORTANT! To prevent damage to the acrylic bottom, it is better to pour water into it.
Lemon and soda
In composition, citric acid is very similar to acetic essence. And the principle of action is similar.
Lemon and soda will wipe off everything. It is enough to apply soda and a few drops of lemon juice to the sponge, as a violent reaction begins. All this breathable splendor is applied to a dirty surface, gently wiped and washed off with water.

With severe contamination, the slurry from soda should be left for 15-20 minutes. Thus, everything will be wiped off: soap, lime, cosmetics, fat.
TIP! Instead of lemon, you can use citric acid. In this case, the powder obtained from the two components is simply slightly poured with water.
Ammonia
It will provide effective assistance in the fight for cleanliness. A few drops diluted in water will not only help to clean the walls, but also create a mini-film that protects against new stains.

If this does not seem enough, then you can take soda (a tablespoon), mix it with a liter of water and add half a glass of ammonia. Leave the resulting mixture for about an hour, gently rub and rinse with water.
It will be great to stink, so it’s better to think about fast airing in advance.
Vodka with water
A good remedy for soapy streaks is vodka diluted with water in a ratio of 1: 2.
Toothpaste
For gentle cleaning of acrylic, toothpaste or tooth powder is suitable. They must be applied, lightly rubbed and washed thoroughly.

The shower is cleaned of soap and again pleases the hostess with its radiant purity!
How to remove limescale
This very raid appears imperceptibly, accumulates quickly. After a completely short time, he will be able to spoil the mood of all those taking a shower.
Help get rid of limescaleandspecial tools.

They say that liquid for washing windows or utensils does a good job of plaque, but this is hard to believe.
Soda
Of folk remedies, it will perfectly help soda with vinegar or lemon. Lemon is preferable, because after it there will be a fresh citrus aroma.
Soda
If soda is in the wilds of the refrigerator, then you can try to use it. This action takes place like this.

- Surface Lavishly wetted with "Cola" or "Sprite" (our soft drinks do not stand comparison).
- Leave for about 15 minutes.
- Wash off with plenty of water.. More fluids will be needed to remove all the sugar.
Shop Facilities
Of special means, they cope well with limescale "Mr. Muscle," "Seth," "Sanelith." They act quite gently.

TIP! Before buying, it is better to check whether the product is suitable for all surfaces of your plumbing equipment.
Melamine sponge
Melamine sponges have proven themselves well. Manufacturers promise that they will cope with soapy stains, limescale, yellowness, rust and even mold. Yes, and they are suitable for all surfaces.

Steam generator
If you do not want to get your hands (or gloves) dirty with solutions, you can try using a steam generator. A strong steam jet is able to safely cope with all the pollution.. She will also be able to destroy bacteria.

IMPORTANT!
Care must be taken to direct steam to rubber and plastic - these materials are extremely negative to high temperature.
But in general, all these problems can be easily avoided if you take care of the booth. Moreover, this plumbing element will require very little care. Each time after a shower, it is necessary to cover all the walls with hot water and walk with a dry rag. And once a week, please plumbing with an expensive spray or a cheap available tool.