What weight does an acrylic bath support: how to strengthen an acrylic bath?

Is the acrylic bathtub robust enough? Will she withstand all the "burdens of life" placed upon her? Read about this and much more in our article.

Acrylic bath weight

An important plus of acrylic bathtubs is its lightness compared to cast iron and metal. It is easy to transport, assemble and dismantle.

Here are the standard data for standard dimensions:

• 120 × 70 cm - 15 kg;
• 150 × 70 cm - 18 kg;
• 170 × 70 cm - no more than 25 kg;
• 180 × 80 cm - about 30 kg;
• complex configuration - up to 50 kg;
• with additional equipment, the typical weight increases by an average of 25 kg.

You can find out the exact data in the accompanying set of documents.

To cope with such a weight is easy even for an ordinary person. But will thin plastic withstand a sufficiently heavy person, will he not be threatened with deformation, or even the appearance of cracks?

We hasten to reassure skeptics, these bathtubs are made of technical acrylic with antimicrobial additives in two ways:

• solid cast (more expensive, but also more durable);
• made of moisture resistant ABS plastic with an acrylic coating.

The technology provides for mandatory reinforcement by applying a polymer based on fiberglass.

How long does an acrylic bath stand?

This question worries all potential plumbing buyers. Especially if the future user, to put it mildly, is not thin.

We can assure you that experiences are completely groundless.

Experts assure that a good quality acrylic bathtub can withstand all half a ton for half an hour.

But to avoid troubles in everyday life, it is recommended to take as a rule:

• "Donuts" should not lean too much on the side of the product;
• you need to enter the bath, leaning on the entire foot and holding your hand on its edge or wall;
• in no case to jump;
• water should be moderately hot, otherwise, especially if the base is made of ordinary plastic, the bath gradually loses its shape (ideally, the material can withstand up to 160 ⁰WITH).

What affects the strength and durability of an acrylic bath?

Please note:

• The number of supporting "legs" carrying the main load. The more of them (usually from 6 to 12 pieces), the stronger.
• Features of the configuration of models (it is best to buy angular).
• The maximum temperature threshold of the reinforcing layer, after which its destruction begins. On average, acrylic plumbing retains its structural properties at temperatures up to 80 ⁰C, but best of all - no more than 60⁰ WITH.

In a word, a small bucket of hot water will not damage the surface layer, but boiling water in large quantities can cause it to “bubble up”.

How to strengthen the acrylic bath?

Strengthening, strengthening and safety of bathtubs contribute to several additional conditions:

• double reinforcement;
• bottom treatment with foam;
• the addition of several legs or the replacement of existing ones with stronger ones;
• frame reinforcement.

Various combinations of reinforcement methods are acceptable.

Install on frame

The purpose of the frame is the uniform distribution of loads over the entire surface of the bath, making it safer and preventing breakdowns and sagging.

Which frame to choose, is it nuen at all - think in advance before you start the installation of a new product.

Important! Mandatory frame is only for the corner model.

Frames come in several forms:

1. Frame - the design is made in the factory from a square profile in the form of a pipe, for a specific modification. All parts have anti-corrosion coating. Collect according to the instructions. Better if a professional does it.
2. Brick - You can do it yourself, but a specialist will do this difficult job with knowledge of the matter. The bowl is placed on a ready-made base, and foam is used for installation on the bottom.
3. Wooden - use plywood and bars with a waterproof texture. It’s not difficult to deal with this business yourself, the main thing is to have some skills and a tool. A little effort - and you do not have to spend money on a factory model or pay a master. A little creativity - and your bathroom will delight all home with its unique design.

In any case, the choice is yours. Due to the strengthening of the bath, one of the ways the risk of damage is reduced to zero. And the operational period of the product increases significantly.

Factory frame frame

Consists of the following components:

• angular supports (according to the number of those in the bath);
• supporting columns of an intermediate nature;
• longitudinal ribs to strengthen the sides;
• height-adjustable “legs” from a quality profile.

When choosing a suitable product, carefully examine the proposed frame. Him excessive massiveness indicates not too good quality of the goods offered.

Advantages and disadvantages

Acrylic option low cost, always is choice of several shapes and sizes, the color scheme is diverse. Such baths keep warm welloh, easy to clean and disinfect, not susceptible to rust. Thanks to low weight they do not create excessive load on wooden floors and are suitable for summer cottages.

Using frame stands and podiums, You can create a variety of interior solutionsthat contribute to a cozy and comfortable stay. Quality products last long and reliably.

When choosing a bathtub from acrylic, check out the product data sheet. For plumbing to serve you for a long time - take the goods only from a trusted manufacturer and follow the rules for its operation. Proper use is a guarantee of long bath life.