Even the most expensive and new TV model can fail due to power surges. To understand what the problem is, an initial diagnosis of the equipment should be carried out and the cause of the malfunction should be found.
Reasons why the TV does not turn on after a power surge
The content of the article
- Reasons why the TV does not turn on after a power surge
- What to do if the TV does not turn on after turning off the light
First of all, after a power surge, you need to pay attention to the power supply and cables. The equipment must be included in the network. Otherwise, the signal simply will not come in and the TV will not turn on.
Important! Make sure that all cables are intact and not carried by heavy objects.
Another reason may be burnout of contacts in the outlet. Due to overvoltage, the contacts melt. A short circuit may occur. Therefore, when you turn on the TV, the screen will not light up.
In some cases, the TV does not turn on immediately. The reason for this problem is the hardware of the TV. Sometimes the batteries in the remote control are weak and the contact is weak. Therefore, when the button is pressed, the plasma does not turn on immediately.
Voltage drops can cause system failures in new modern models. Because of this, the screen does not light up. However, in this case, you should pay attention to the diodes. If they blink, then the cause is in the system. If not, the TV burned out.
What to do if the TV does not turn on after turning off the light
If after turning off the light the TV stopped turning on, first of all you need to check if the remote control is working. Change the batteries and try pressing the button again.
In the event that replacing the batteries did not help, check for electricity in outlets and wires. You also need to inspect the fuses in the house. Then try turning on the TV again. If the equipment turns on, but there is no image, then the problems may be in the internal details that are out of order. Only the master can accurately say.
Power outages happen quite often. No one is safe from them. Due to such differences, the equipment in the house often burns. If, after turning off the light, your plaza stops working, you need to find out the cause of the malfunction and try to solve it yourself. When the problem cannot be solved on your own, you should contact a specialist.
