Not everyone has acquired a new technique. There are families where they use old TVs. To connect to digital television, they came up with new devices that can be connected to older models.
What is dvb t2
The content of the article
- What is dvb t2
- How to connect dvb t2 to an old TV
- What problems may arise during the connection
How to connect dvb t2 tuner to tv? This prefix is called the second generation standard. During operation, increases network capacity by 30-50%. The basic structure and frequencies are preserved. DVB-T2 provides the following features:
- Standard definition (SDTV, 4: 3 and 16: 9 formats).
- High definition image (HDTV).
- Ultra High Definition (UHDTV).
- 3-D television (DVB 3D-TV standard is applied).
- Multiplexing (multi-channel).
- Interactive hybrid TV (HbbTV format).
- Languages.
- Different sound quality.
The dvb t2 set-top box is connected to the old TV and the signal is received through an antenna connected to the receiver. It is either general or individual.
How to connect dvb t2 to an old TV
Connecting the dvb t2 set-top box to the TV implies the presence of a complete set that contains everything you need to connect. Some details may vary, but you must tell the consultant the brand of the TV when buying. Then for the buyer they will select the most suitable set. Usually it includes the following components:
- connection information;
- RCA cable (“tulips”) or HDMI;
- signal converter (tuner);
- Remote Control;
- nutrition;
- adapter.
How to connect a dvb t2 console to a TV? You need to inspect the back of the TV. There must be appropriate inputs, jack sockets. First, both devices are disconnected from the source of electricity. The plugs of the RCA cable are inserted into the corresponding jacks. They must match their colors. Yellow shows the video signal, and white and red audio channels. Then the antenna turns on. For her on the device is an input marked "RE IN". If there are no corresponding RCA jacks, you can purchase an adapter for SMART input, when there is one. If the TV has an HDMI connector, then take the appropriate cable. When the model is very old, then the cable is inserted into the “RF OUT” connector.
How to connect dvb t2 to an old TV? In fact, the tuner’s antenna connects to the VCR. The antenna output of the video player itself is connected to the telecom. Then the channels are tuned, saved a little later.
What problems may arise during the connection
You need to know that the scheme for connecting dvb t2 to a TV requires an antenna that operates in the range 470-860 MHz. If after connecting, the prefix does not find the channels, then:
- The used antenna does not work in the desired range.
- The software is out of date.
- Equipment does not comply with DVB T2.
How to connect a dvb t2 receiver to a TV? In such situations, they simply change unsuitable components, acquire new software, and buy an adapter. Also, if you take the signal from the composite output, then there should be no problems at all. It is necessary to watch that the prefix is high-quality, not fake, not self-made.
Very old devices may not have audio and video inputs. There is no ULPTST, ULPTST (I), UPIMTST, so you need to output wires to the connectors "tulips" from the block of the radio channel. If the VCR is connected to the device via “tulips”, then the set-top box is also connected easily.
