How to make a TV out of a monitor? Is it convenient to use a computer monitor instead of a TV

In the modern era, the line between TVs and monitors is increasingly blurred. They are not inferior to each other in terms of parameters and are in the same price category. It is these factors that make it possible to replace a computer monitor with a TV or a TV with a monitor without loss of functionality. This article will discuss in detail the possibilities of replacing devices.

Watching movies from the monitor

Many have long stopped using the TV to watch movies or TV shows. For this, a computer monitor, which has the same parameters as a TV or laptop, is quite suitable. Watching from a laptop is not very convenient, it is better from a computer. In many cases, using a PC monitor is much more practical and convenient than a TV. As, for example, when watching movies online, users do not need to understand the settings and cables for a long time, trying to connect the TV device to a personal computer or laptop.

Simply deploy the monitor more conveniently and start watching a movie. The only thing that can overshadow the viewing of a movie or series is the relatively small screen size. However, for the time being. When there are monitors with a diagonal of more than 30 ”on the market, this problem goes by the wayside. That is why replacing a monitor with a TV or a TV with a monitor is not something fantastic, but a completely ordinary thing that absolutely any user can master.

How to make a TV from a monitor

In order for the computer monitor to begin to perform the functions of a TV, you do not need to have special knowledge or skills. Any user is capable of doing this. Before proceeding with the task, it should be remembered that the higher the resolution of the monitor, the more comfortable the image will look on it. There are several ways to turn a computer screen into a TV device.

TV tuner

The simplest and most obvious way to transform this is to purchase an ordinary TV tuner that is capable of independently receive TV signals, convert them to send to the TV screen, and in our case monitor.

Important! When purchasing, you should pay attention to that. So that this console is completely independent, and does not require connections to a PC.

When purchasing a TV tuner, the user does not need additional devices, since this console is completely self-sufficient in receiving and processing signals, and it does not require any additional modules or adapters, except for a special RCA cable. Access to the antenna is also required.

Typically, the console comes with a remote control, so when you buy, the user completely turns his monitor into a TV. This is the simplest and most convenient solution. Since the TV tuner does not require installing or updating drivers, it is small and has the ability to connect any audio system. The last item is provided with a separate audio input, to which you can connect any speakers or even a home theater.

Of the minuses, it is necessary to highlight the need to connect an antenna and the lack of its own speakers on the console.

TV box

If you have Internet access, you can use the TV set-top box, which turns the monitor into a full-fledged TV. This device is capable of processing and displaying a high quality signal, which gives this device an advantage over conventional tuners. Provided that the connection does not differ from switching with a conventional tuner, and the number of available functions increases many times. Among the set-top boxes, one should highlight the subcategory Smart TV set-top boxes. This improved variation allows you to not only watch any programs and movies, but also use Internet services such as YouTube, Facebook and others.

To connect such a console, an HDMI-VGA cable is required, which is quite simple to purchase in specialized stores. The only negative for this console is that for normal operation requires a constant high-speed Internet connection. Typically, these consoles connect to the World Wide Web via Wi-Fi, which makes it easy to configure. If the speed of the Internet connection is poor, the set-top box will not be able to provide high-quality image transmission.

Using a special board

There is a method of transformation without a TV tuner - using a special board that connects directly to the monitor. There are many different models of such devices, but in this case, the most universal will be a board that has HDMI and a USB port, for easier connection.

To connect this board, you should disassemble the screen and place a new part instead of the LVDS module. You may also need to replace the cable to which the board is connected. Also in some cases, requires the installation of an additional power supply. In order to carry out this procedure, the user must have special knowledge and skills.

Replacing blocks and modules on an old monitor

The most time-consuming way to turn an old screen into a TV is to replace the graphics card and control unit. Additional details are also necessary, without which this procedure is impossible. The most important condition for the transformation is the presence of a VGA port, without which the conversion will not succeed. Fortunately, almost all monitors have this connector, so finding it is not difficult.

Important! To turn a monitor into a TV device, the user needs at least basic knowledge and skills. Their absence makes conversion impossible.

The following accessories are required for the TV.

Color Adjustment Module. Image quality depends on this detail. This module is most important when the device is functioning properly.

Radio channel module. This part is designed to process incoming frequencies, highlighting intermediate ones among them. This allows you to receive a TV signal.

Control block. This system is designed to control and control a TV device both remotely and manually. Without a control unit, adequate TV operation is not possible.

These components should be connected to the monitor by connecting connectors and loops. This procedure requires specific knowledge and skills from the user, therefore this method is not recommended for those who are not familiar with the technique.

How to make a monitor from a TV

It is much easier to transform from a TV device to a computer monitor. This is due to the fact that most modern TVs already have the necessary connectors, and connecting them to a computer does not require complicated technical procedures. Before proceeding with connecting the TV to a computer, you should choose which cable and connector to carry out this procedure.

HDMI This connector provides a great picture and the ability to transmit audio. Buying a cable for this connector is quite simple, and the port itself is very common. The only difficulty may be the lack of this connector on one of the devices.

VGA A universal port that provides only image transmission in an analog way. The connector is very common, however, the lack of sound transmission can be difficult for some users.

DVI A port used to transmit digital images. It is found a little less often than other ports, so often you will need an adapter for another connector to connect.

The most practical and convenient will be the use of the HDMI port. It provides perfect picture and sound transmission, and also does not require any unnecessary technical solutions for connecting the monitor and PC.

Connecting a device through this port is quite simple. You only need to insert the cable into the connectors, both on the TV and on the computer, and then configure the resolution through the appropriate menu.

If one of the devices does not have an HDMI port, you should use a special adapter or adapter that will allow switching through different connectors. There are also HDMI-VGA and VGA-HDMI cables, which allow the user to avoid the difficulties of using a converter or adapter.

Reference! To configure the audio channel through a TV device, go to the sound settings “Start” - “Control Panel” - “Sound”. Then click on the connected device with the right mouse button and select “Use by default” in the context menu.

If the connection was made through a VGA cable, the sound will have to be provided by connecting individual speakers or speakers.

Why the monitor may not work TV

The monitor loses to the TV in many ways. If we compare models from the high price segment, the difference is not so great, however, budget models have much more differences. As, for example, the main difference between a monitor and a TV device is the screen size. The market for television models provides much more options when choosing the size of the diagonal. Unlike computer displays, the maximum for which is 30-35 ”, there are more than 50” models on the TV market, which gives TV devices a definite advantage.

Another serious drawback when choosing a PC screen as a TV device is the distortion of colors and the appearance of spots on the screen when changing the viewing angle. Since monitors are designed to work in close proximity, often developers do not take into account such a fact as changing the viewing angle (if we are talking about budget models). Problems with contrast are also possible, but this drawback arises mainly with older models.

Also a serious drawback of monitors is the insufficient number of ports and connectors. Unlike TVs, which can even have up to four HDMI ports, PC device screens have only one or two connectors. The same goes for other inputs. A rare monitor has a USB port or outdated composite outputs. This makes the TV more versatile for connecting various devices.

In conclusion, we should say a few tips and tricks for using the monitor as a television device and vice versa. You should not try to carry out complex technical work to convert a computer screen to a television, if the user does not have special knowledge and skills.

If there is an urgent need to convert the monitor to TV, the most appropriate way is to use a special console. The TV is a more versatile device for transmitting images. Than a monitor. This is evidenced by the rich color scheme and a larger number of connectors.

Large diagonal TVs are cheaper than monitors of the same size.