What is lnb satellite in on TV: how to use

Nowadays, satellite digital broadcasting is becoming more and more popular. Modern TVs are distinguished by the presence of special modules and connectors, allowing you to watch movies, broadcasts in high quality.

What is lnb satellite in on tv

The firmware of the receivers used initially includes special keys that allow you to watch television channels that are under special encoding. No keys are provided on the TV. It is impossible to enter key combinations or change the firmware.

Important! To watch TV using modern DVB-S2 technology, special CAM modules are used, into which cards from operators are inserted. Then the module is inserted into a special PCMCIA slot. In this case, the satellite dish must be connected to the LNB Satellite IN connector.

Why do I need lnb satellite in on TV

For satellite digital broadcasting, a DVB-S2 or DVB-S tuner is used. Models with a built-in satellite receiver easily find all the channels available for viewing. Search is possible in manual or automatic mode. In most cases, a stable signal is received from at least four satellites. It is important to understand that only the built-in satellite receiver and the installed antenna will not be enough, because each television channel is encoded and requires special decryption.

The standard under consideration has the following important characteristics:

• Broadcasting programs in high resolution;
• Using an Internet connection to view additional content
• providing access to viewing thematic programs;
• the ability to connect additional devices to the same network for the distribution of television content.

The transition to the modern DVB-S2 standard is due to the need to improve the quality and improve the transmission speed of digital information.

How to use

A television antenna must be connected to a special connector on existing equipment. Then, the setup process begins in the “Channels” tab in automatic mode. The source of the signal should be "Satellite", after which the setup process continues.

Be sure to choose a satellite and customize the display. It is recommended to click on “Change satellite settings” and find available channels. After that, click “Next” to search for programs displayed on the equipment used.

Reference! A window with a variety of settings will be available in the window that appears. It is recommended that you check the quality of the signal used and the displayed image. Depends on how well the antenna is tuned to receive satellite channels.

In the next step, search parameters are determined. If the CAM module is not available, select “Skip encrypted channels”, because they are not available for broadcast. To search, click "Run."

After the channels are found, you can sort the programs, make additional settings for high-quality image, sound. After that, you can fully enjoy watching television.