Laying tiles on an OSB slab on the floor: is it possible to lay tiles on an OSB slab on the floor?

Among the most popular materials used when performing the pre-finish layer of internal finishing works include oriented chipboards (in English - OSB or Oriented Strand Board). The affordable price and the ability to smooth the surface of the floor, ceiling and walls in a short time made this universal material indispensable. We will tell you about the features of laying tiles on a horizontally located OSB plate.

IMPORTANT: High-quality coating for a long period is possible only if the surface is properly prepared. plates, selection of appropriate impregnations and primers in order to combine different in their physical qualities materials.

Is it possible to lay the tile on the OSB plate on the floor?

There is no consensus on this issue. Some experts in the field of interior decoration deny the feasibility of laying tiles on OSB, while others are committed to using oriented - particle boards in as the basis for laying tiles on the floor, focusing on the need to take into account the characteristics of various materials and the need to comply with execution technology works.

Everyone must make their choice. But for this it is necessary to understand the characteristics of the materials and decide: either strictly adhere to the technology and use the opportunity to get the result at an affordable price, or prepare another foundation for styling tiles on the floor.

OSB tile on the floor - expert advice

ATTENTION: The fundamental requirement is the correct preparation of the base, taking into account the features of the OSB board.

• The distance between the logs should be 40-60 cm, depending on the thickness of the plate. The underfloor space must have good ventilation.
• Use a plate with a thickness of 15–25 mm.
• If a raw material with fractional cutting is used in the material and the area of ​​the room is large, before laying the tiles, it is better to make the flooring from GVL sheets, a cement-bonded particleboard or moisture-proof drywall. In a small room there is no need for additional flooring. But the surface of the OSB board must be treated with coarse sandpaper to enhance adhesion.
• The adhesion coefficient between coatings and moisture protection will provide effective primers. It is recommended to use a moisture resistant plate.
• After a primer it is possible to cover with varnishes or paints. All these measures are designed to reduce the water absorption of the plates, which, with increasing humidity, increase their volume and reduce physical strength.
• Another option: reinforced metal mesh is laid on top of the treated plate. In this case, the tile is laid using adhesive mixtures used during installation in standard conditions.
• The easiest way is to lay directly on the stove. It is necessary to use only special adhesive mixtures designed for laying tiles on a wooden base.