TV is an integral part of the life of a modern person. Users of various models often have problems with the image - it can double, “break” or be excessively enlarged. What to do if the picture suddenly becomes larger than the screen itself and does not fit in it? Is it possible to save the situation on their own? Of course yes! This will not require special skills. About what to do in a similar situation, you will learn in this article.
Why does the TV image appear large
The content of the article
- Why does the TV image appear large
- How to reduce the picture on the TV
In most cases, problems with the image size appear due to the mismatch between the screen size and the image format. This is because the broadcast signal is transmitted in 4: 3 format, and a modern TV has a 16: 9 signal ratio. In general, in this situation, the picture most often does not get too big, but has wide gray stripes on the sides, which significantly interfere with viewing. But some televisions have a feature that stretches the image. Due to this, it turns out to be completely fuzzy and wide.
If the signal comes in a 16: 9 ratio, but the picture still does not suit you, then the cause of the problem may be hidden in the overscan. We can say that this function is already a “relic”, so it is completely unnecessary in modern models. But if the overscan is connected, then a certain amount of the image on the sides is still cut off. Because of this, the deformation of the picture is obtained.
What to do with all these troubles?
How to reduce the picture on the TV
Do not panic. In the first case, you need to manually scale the image. This can easily be done by finding a menu item called “Image Format”. There you can try several options and choose the most suitable for yourself.
Turning off the overscan also does not have to fiddle for a long time or call a professional master. It is enough just to perform a few simple manipulations.
The first step is to run the AVS HD Rec test disc. 709 and find the section called “Basic Settings”. The fifth chapter is in it and is responsible for the function of the overscan. Now adjust the aspect ratio to 16: 9 and adjust the percentage of overscan to zero.
IMPORTANT! In each TV model, the internal interface may differ, so there are no uniform recommendations. You can disable this function and bring the image back to normal intuitively, knowing exactly what you need to do.
It may also be that the scale changes in the signal source itself. In this case, check the image output settings.
Now you know why the picture on the TV screen suddenly began to seem too large or stretched. With a few simple steps, you can easily change the scale and get the image in maximum quality, which will be broadcast "point to point". This is the name of the mode in which the proportions of the signal and the TV are identical and perfectly match each other.
