How to properly strip the antenna cable for the TV: how to connect the antenna cable

Television has become so popular that almost every apartment has this device that is already familiar to everyone. When connecting digital or any other television, most users prefer to trust professionals and do not take part in the connection process at all. But can you do it yourself?

Connecting a TV to an external signal using an antenna cable is not a big deal. Even a beginner will cope with this task, and you will read about all possible difficulties and mistakes in this article.

How to strip a TV antenna cable

The first step is to strip the coaxial cable under the F-connector. This stage can scare inexperienced users who do not understand why this is necessary and are afraid to spoil the wire. Do not panic.

The fact is that in most modern TVs such connectors are common, and to "fit" a wire under it takes no more than a minute. If you clearly follow the instructions provided and act as carefully as possible, then everything will work out the first time.

Necessary tools

Please note that you will not need a large number of tools to strip the cable. Will be required:

• knife.
• nippers.
• cable and connector.

All this can be found in any apartment where there is a tool case, so you don’t have to go to the store for new purchases. When everything you need is at hand, you can get to work.

The algorithm of your actions

1. First, make a round incision on the outer insulation at a distance of about 12 mm from the edge.
2. The shell is removed, and the screen without a foil is bent.
3. Now we make a similar incision on the inner insulation, backing at least 8 mm.
4. Remove the internal insulation.

Now we fasten the connector to the wire. The work is over!

How to connect the antenna cable

Many had to deal with a situation where the length of the wire is simply not enough. In this case, try to lengthen it.

There are several ways to do this, but the easiest way is to lengthen using the F connectors, which can be purchased at a specialized store. Before you begin to work, you need to not only purchase these connectors, but also cut the wires of one and the second segment.

IMPORTANT! Please note that the connectors come in different sizes, so it’s extremely important to either find out the size you need in advance or take a wire with you so as not to make an annoying mistake when choosing.

Preparation comes down to the fact that it is necessary to cut the outer sheath of the wire, wrap it back and remove at the first point of the cut. Then we bend the screen and clean the main core. Be very careful stripping the insulation so as not to damage other important cable elements that will affect the quality of the TV. Then F conductors are screwed onto the cable, with the help of which the connectors previously acquired in advance are subsequently fixed. Thus, the cable connection will be completed, and you will get a wire of the required length. Now you know how to strip the cable and extend it if necessary. With this knowledge, you can connect your TV yourself and enjoy your favorite shows and TV shows at any time.