From old and unnecessary jeans, you can make a lot of useful items. Most people are accustomed to using bags or skirts most often for jeans. But in fact they can be used for more global projects. If there are a large number of unnecessary jeans, then you can change the upholstery of the sofa.
What materials and tools will be required
The content of the article
- What materials and tools will be required
- Preparatory work
- Sofa upholstery with old jeans: step by step
If you have gathered a lot of denim items, do not rush to throw them away. Upgrading things, you can get a good result in the refinement of the interior of the house. What will require a little patience, as well as:
- sewing machine;
- scissors;
- needle;
- screwdrivers of different sizes;
- threads
- jeans directly.
Preparatory work
During use, the upholstery loses its appeal, smoothness, and sometimes integrity. But the sofa frame is just as strong.
The upholstery process begins with the dismantling of furniture into individual elements. In this case, the stages of the work will depend on the configuration of the sofa. As a rule, the armrests are unscrewed first (if any), then the back and mattress are removed.
Recommendation: It is best to put the hardware in a separate container so that during assembly you do not encounter the issue of lack of fasteners. Number the elements, draw a diagram in order to know in the future how to make the installation.
Important! You can record the disassembly process on the camera or take pictures of each step - this will be a good example of the subsequent assembly.
Sofa upholstery with old jeans: step by step
To remove the old casing from the sofa, use a screwdriver to lift the staples holding the upholstery, after which they are removed with pliers.
Care must be taken not to damage the skin, which will still be needed in the future.
Recommendation: Before starting work, it is best to lay oilcloth or old newspapers on the floor. It’s just that when removing the lining from the old sofa, various rubbish and crumbled synthetic winterizer will start to spill out.
When cutting old jeans, upholstery removed from furniture is used - it is used as a pattern. During cutting, it is necessary to additionally make allowances of 2-3 cm, this is required to connect different elements of denim, as well as for further upholstery of the sofa.
Recommendation: If there is a lot of denim, then it is possible to sew from it various additional elements for decorating the room - pillows for sofas, curtains. So you can create a harmonious and original interior.
Attention! Before pulling upholstered cut and sewn on the patterns, it is necessary to prepare the base. On top of a synthetic winterizer or a spring block, it is absolutely necessary to lay a non-woven, batting or foam rubber. Such a gasket will protect the material from abrasion, simplify the process of tensioning the casing and extend its operating time. Moreover, if you use a thick layer of foam, the sofa will be much softer.
It is necessary to pull the weave very carefully, best with an assistant. Sheathing must have the same stretch in all places and in every direction. In this case, the product will look attractive, the casing does not deform after a short time. It is convenient to fasten jeans material with a stapler, but they also often use an ordinary hammer and furniture studs.
After the sofa has been upholstered, it is necessary to assemble the furniture in the reverse order. You need to act clearly on the photos or on the video instruction, which before that was prudently recorded during the disassembly. If only the numbering of different elements was made, then it is also not difficult to assemble furniture taking into account the plan-scheme.
