People often ask if vinyl floors should be glued. The reason many people are wondering is the result, whether you stick them on or not! There are several types of vinyl flooring, each with a unique installation process. the floor. Before buying and installing, be sure to read the manufacturer's instructions and options for installation.
What glue to use
The content of the article
- What glue to use
- Instructions on how to make gluing in stages
- Things you need
- A warning
Using high-quality glue for your vinyl floors will not only speed up your project, but also increase its service life, which will look better over time. There are a number of adhesives for laying vinyl floors or simple repairs to existing floors. Some adhesives are better suited for small home projects, while others require the application of knowledge and skills and are more suitable for large commercial areas.
The best types of adhesive for vinyl floors should be as versatile as possible. For example, some adhesives can be used to glue a range of vinyl flooring, including hard vinyl tiles and vinyl boards, luxurious vinyl tiles, vinyl staircases, vinyl-based carpeting and stretch vinyl sheet flooring basis.
REFERENCE! Fast drying times are another important quality. Quick-drying floor adhesives facilitate movement and reduce slippage. In addition, the adhesive, which is resistant to plasticizer transfer, increases the durability of floor adhesion - a quality that is especially important for stationary installations.
You should also check if the glue is not painted and resistant to moisture and alkalis; can it should be applied on a reduced flooring; and does the company that produces the adhesive offer guarantee.
Different types of adhesive for vinyl flooring offer a number of different advantages, such as stitching technology, which you need to glue the floor to the floor. This helps to strengthen the product and increase its durability. Alternatively, some adhesives may have a very aggressive peel, and some are recommended for indoor use only. Buy glue resistant to mold and fungi; it can be washed with soapy water; and it has good environmental performance, such as a product with a low level of emission of volatile organic compounds.
Instructions on how to make gluing in stages
REFERENCE! If you do not like the curved edges of your linoleum, its days are numbered, relax. A little curling does not mean that you should switch to a new floor. Loss of adhesion, usually due to moisture, can sometimes lead to delamination of the edges from the floor.
If linoleum is in good condition and you do not want to replace it, you can easily straighten it with several inexpensive supplies in the store.
Point the hair dryer at linoleum high for a minute or two to make it a little more supple. Gently pull the linoleum back.
Remove exposed base. Use a plastic scraper to remove debris. Sweep dust into the bin or vacuum the particles. If moisture has leaked between the linoleum and the base, it may be wet. Allow it to air dry - for several days before continuing.
Apply an even layer of floor glue to the underside of linoleum with a spatula. Level the linoleum and roll it with a rolling pin or staple to secure it more securely.
Wipe off any excess glue that might have spilled from under the edge of the linoleum with a damp cloth. Put the weights on top of the linoleum, such as two on four phone books. Add weight to them with cans or heavy boxes.
Leave the glue overnight, then remove the weight.
Things you need
- Hair dryer
- Plastic scraper
- Broom and Baking Pan
- Adhesive for vinyl floors
- Putty knife
- Rolling pin
- Wet rag
- Weights
What to do if linoleum began to peel off the floor
When your linoleum creatures are cleansed, act quickly. The sooner you repair, the easier it will be.
After applying the glue, apply silicone glue along the edge of linoleum, if it is in an area exposed to moisture, for example, at the base of the bath. This will prevent water seepage and further peeling.
REFERENCE! To prevent linoleum from peeling off again, consider installing skirting boards along the wall around the room to help keep the edges of the linoleum down.
A warning
Be careful when stretching linoleum, especially when it is cool. It may crack and crumble, or a piece may break.
Do not overheat linoleum. Excessive heat can cause surface bubbles or discoloration.
If moisture has damaged the base, such as rotting wood or mold, you will need to repair it before you can re-stick linoleum.
When working with products such as floor glue, follow the manufacturer's instructions and follow the recommended precautions.
