Chair in wood with their hands: how to make a wooden chair, photos, drawings, a chair made of solid wood, chair repair, high chair, wooden chair with a backrest

Meanwhile, most people acquire the construction of the producers and spend a lot of money, you can do for yourself to become a manufacturer. You do not need a lot of money and time, you only need to light up the desire to include fantasy. This article will try to do everything possible to maximize the design process was simple and straightforward.

variety of chairs

In today's world society to distinguish between several models of buildings. Let us examine each of them below.

array

It is considered the most common among the others like him samples because it is quite elementary construct. And if you're going to start your way in building a variety of devices, it is best to begin with this option. Also ease of manufacture, it should be noted considerable reliability and durability.

This unit will serve you for a fairly long period of operation. Also, these chairs are perfectly suited for the most different interior, it is they have the versatility. As for the assembly, so a careful picking up materials for the frame. Best solid wood. For seats - plywood, with any means it can break off. But the disadvantages can be found in each design. In this case, it is massive. However, this drawback can be at least partially smooth. This will require a small density of the raw material.

Cot

If you think an amateur outings or the owner of the suburban area, the perfect choice option presented. With its use will not be possible difficulties arise in transporting the device. In addition, convenient enough to use it, if you're in a small room. He is able to not take up much space, since it easily can be folded and put against a wall or the side of such furniture. If necessary, it will not be difficult to decompose in the working position and use as needed. Speaking of the obvious merits of design, it is worth mentioning the maximum mobility, as well as its inherent small size. As for the building itself, as is the use of plywood in a large number of layers. It gives extra comfort to each user. When planning to spend a lot of time in one place, for example, on a fishing trip or a picnic, worth thinking about the production facilities of the web. Excellent in the application will tarpaulin.

Transformer

An excellent choice would be given for the construction of a permanent location at hand. This is due to the fact that the chair can be easily expanded at the right time. Like the previous version presented also suitable for use in a cottage garden or in any space in the countryside. In addition, do not deprive the attention the device when repairing or cleaning, since in any case the seat is useful.

The choice of materials

Approaching the independent manufacturing facilities, should carefully pay attention to the selection of a suitable material. Thus, not every timber is suitable for use. It must meet certain requirements, which are considered below. First, let's understand that the decision will depend on the specific operation. If you think about it, you will notice that unlike the cabinet or other similar furniture, the chair is constantly exposed to the movement. Therefore, it is not in the texture of the original material and not even in strength. Consequently, the use grained structure is not highly advised.

REFERENCE! As an example may be mentioned about conifers. This is because in the impending horizontal loads can lead to cracking. What will happen to constant repairs or even replacement of the entire unit.

The most appropriate choice would be the following accessories:

• Plywood is perfect for the construction of "clamshell".

ATTENTION! It is not recommended to select from categories PSF, because when heated it is possible emission of harmful substances to humans.

• Deciduous, with solid rock for the remaining models (oak, elm, mountain ash, etc.). The main thing - remember that the detection of defects with the naked eye, it is not necessary to acquire the material.

How to prepare your tree

There are several features that are worth knowing in the process. For example, an important step is the impregnation parts using biocide. It can be a variety of special oils for wood, or emulsion. The main thing that was present in the composition of the wax. As for the humidity of blanks, so this figure should not exceed 12 percent. The actual process of preparation begins with the manufacture of individual structural elements: two rear and the two front leg straps for the armrests in the amount of two pieces, five longitudinal and two transverse strips, jumpers seat.

Chair from a tree with his hands

To make all actions maximum accuracy, it is necessary to prepare a pre-process. You will need tools such as:

• Electric jigsaw.
• Saw.
• Stapler.
• Chisel.
• Mallet.
• Plane.
• Roulette.
• Screwdrivers.
• Construction adhesive.

Drawings and photos

After all the necessary items are at the ready, you can begin to design the structure. To do this is to do a sketch. He will need to be guided in the process and build a nice wooden chair. Below is a sample of a proven construction of the chair. On it you can learn and take on a note size used. It is important to understand if you want to change one of the indicators of any details, you will need to edit all other parameters, respectively. It is necessary that the design was stable and reliable in operation. With this preparation is able to handle even an inexperienced master, as it can be seen that this device is quite simple. If necessary, repair, you can also make your own efforts.

Step-by-step instruction

It is to perform actions in a predetermined sequence to perform work efficiently as possible.

1. First you need to prepare two pieces of wood. One of them - the length is 80 cm, useful for the manufacture of the chair, and another - for the front feet (44 cm). For the base should be taken two openings at the same elevation. We should treat the leg sections, thereby aligning their pre-lay them on top of each other. After that you can start basting the place where will be located in the future other cavities. As a result, should get a box that stands on legs.
2. After the performed manipulations necessary to make holes at the marks with a chisel. Then it is possible to shake off dust formed.
3. It should take 4 bar with future spikes whose size is from 10 to 12 millimeters. Spikes need to cut carefully, so that they were in the recesses without gaps.
4. Then you are ready to back the production. On the board make holes on the inner side in accordance with specified dimensions. These fixed seat at the expense of a special attachment. Make sure that the construction has been the most durable.
5. Next you need to give a rounded shape with the back legs. This is done through processing. Then do not forget to polish the resulting surfaces.
6. As for the base, is the use of lacquer in order a treat. Soak time for drying the layer.
7. For the preparation of a chair with a soft base, you need to arm themselves with foam. It is attached by a staple to the seat.
8. During assembly stands to attach spikes, pre-treating them with glue due mallet. Remember, all actions must take place carefully to prevent cracking.
9. As a result, the main part is screwed into the back of a chair, fixing them with screws.

Children's chair from a tree with his hands

Of course, the approach to the process facilities for children will be different from others. This is due to the difference in the required size, thus less waste of material. Namely, the length of the legs, planks and connecting with a seat frame members is no more than 20 centimeters. Picking up the parts for legs, should pay attention to their thickness, the parameters must be guided by 5 * 5 cm. With regard to the necessary tools, so it's screwdriver, jigsaw, screwdriver and a hacksaw.

Drawings and dimensions

Of course, an important step is to choose the size. In this case, it will depend on what the child should be on a par with others in finding a table. This will require a considerable length of the legs, which are mounted wide enough against the ground. The upper part must be less than approximately 30 cm section. better to do depevyanny chair with a back.

Step-by-step instruction

After a preparatory phase can proceed directly to the work, which consists of the following steps:

1. Drank all the bars of the array of the correct size. If necessary, remove the extra segments.
2. Connect the legs to the main structure. This procedure takes place with the help of special hardware. It is also recommended to use a construction adhesive.
3. Due to the screws to fasten the seat and back of the chair.
4. The resulting structure should handle with sandpaper to eliminate possible irregularities.
5. Further, if desired, the apparatus equipped with varnish and dressing.

IMPORTANT! Before using the chair children pre worth checking unit for durability.