Do-it-yourself table of furniture panel: tools and materials, table manufacturing process.

Do-it-yourself furniture is not just an exclusive item. This is also evidence of the mastery of the owner of the house. With a small supply of knowledge and a basic set of tools, you can easily make a table that best meets the requirements of size and design. The best material for this would be a furniture board. The tree used in its production has such positive qualities as optimal humidity and environmental friendliness for humans. The simplicity of working with a shield will make it easy to make an exclusive and convenient interior item out of it.

Tools and materials for a table from a furniture board

Before starting work, you need to take care of the tool and materials. Given the simplicity of processing furniture panels, complex and expensive equipment is not required.

Tools that will be needed in the process:

1. Jigsaw, hand or circular saw. It will be required for cutting the shield, and timber. Since wood is a fibrous material, it is advisable to have a tool with small teeth.
   instagram viewer
2. Sander or sandpaper. For surface treatment and edges of the shield. Giving the product a beautiful look is not the least important task. Especially if it is not for the garage or workshop, but for the home.
3. Drill, screwdriver. For fastening the legs and stiffener.
4. Measuring tool. Ruler, tape measure, square. As the saying goes: "Measure seven times, cut once."
5. Wrench for screwdrivers.

For a simple model, a lot of materials will not be needed. In the manufacture of the table you will need:

1. Furniture shield. Part size - 60 cm by 160 cm. These are optional sizes, you can choose for your room.
2. Timber. Used to stiffen the structure. Suitable for 4 to 4 centimeters. If the countertop is large - then it is better to take a thicker one. The length of the beam in our case is 440 cm.
3. Varnish, paint. To give a better appearance to the product.
4. Iron legs - 4 pieces.
5. Screw-nuts, self-tapping screws. We will fasten the structure with these details.

REFERENCE! All the necessary materials can be easily found in a furniture store. Big expenses for this will not be required, and the table will stand and please the owner for many years.

Making a table from a furniture board with your own hands

Having prepared all the necessary materials and tools, you can begin to work. It is quite simple to make a table from a furniture board and there should be no problems.

After everything you need is conveniently located in the workshop, it's time to start:

1. Cut the countertop. First you need to measure the required length and width, draw a cut line. After that, carefully and slowly, cut the tree with a saw or a jigsaw.
2. We prepare the beam. It needs to be cut into 4 parts, 2 in length and 2 in width of the countertop. Cut an angle of 45 degrees along the edges of the timber. If there is a miter box - well, in the absence of it you will have to use a protractor.
3. Screw the beam with screws. To do this, it must be placed on the edges of the countertops so that the cut corners are joined. After drilling holes for screws, and fix the parts. The beam will not only give the best look to the table, but also make it stronger.
4. We screw the screw-nuts in the places of installation of the legs. First, we drill holes for them, then we screw in using a key.
5. We fix the legs on previously screwed-up screwdrivers.
6. Grind with sandpaper or a grinder. It is necessary to grind the product well. First coarse paper, then fine-grained.
7. We cover the table with varnish. For a better appearance, it is advisable to process at least 2 times.
8. We are waiting for the varnish to dry. The table from the furniture panel is ready.

It will not take a lot of time and money to make such a table. Having spent quite a bit of strength, you will receive a high-quality and beautiful piece of furniture that will take its place in the house for a long time.