Do-it-yourself smokehouse from a washing machine: a simple option, a home-made smokehouse from two washing machines

Probably, everyone thought about buying a smoke-cured smokehouse. With its help, you can smoke fish, meat and create delicious dishes at home. Moreover, hot smoking requires much less time compared to the cold version. In most cases, the cost of a shop smokehouse can be unreasonably high, so you should consider creating it from improvised materials.

In our article, we will talk about how to assemble this device from a washing machine. This article will be especially relevant for those who have old appliances that have failed. Do not rush to throw it away, it can serve for reuse.

A simple version of a smokehouse from an activator-type washing machine

To begin, consider the simplest option of creating a smokehouse from a machine with an activator type of work. The main body is made of stainless steel, which gives the structure strength and does not allow the metal to react with food products. To create a smokehouse you will need to follow these steps:

1. Turn the washing machine upside down, remove all unnecessary parts of the structure, leave only the inner case.
2. Using a welding machine, close all openings on the bottom of the cabinet.
3. For convenience, make a hole in the lower part on the side in order to toss wood chips during smoking.
4. Inside the tank, make special fastenings to maintain the grill, products will be placed on it.
5. Place the grill inside and fasten it. A simpler option would be the use of metal rods, which will serve as a supporting structure.

After completing all the steps, you can use the smokehouse for its intended purpose. After the first use, you can refine the design, add elements for convenience. You can also think over the details for installing the structure over the fire.

Attention! To perform the work you will need a one-piece case without mechanical damage, holes and dents. Before starting work, do not forget to thoroughly rinse the tank and rinse it with boiling water to remove excess dirt and microorganisms.

Home-made smokehouse of two washing machines

If desired, you can increase the volume of the working capacity and improve the design. To do this, you will need to use two tanks from washing machines. In this case, there are two ways to improve the case. Use the following plan to complete the work:

1. Prepare all necessary parts and tools. Clean the tanks of the machines beforehand.
2. Connect the two tanks with a welding machine. In this case, leave the top open, it will need to make a special cover on it.
3. After that, follow all the steps as described above. Make fasteners, install the grill.

Such a construction will also need an open fire, on which chips will smolder and give smoke for hot smoking of products. The advantage of this design is the large size and the ability to cook several servings of products at once, which will significantly speed up the process. However, the dimensions of the smokehouse will be much larger - this option is perfect for summer cottages.

DIY mini smokehouse

If you like traveling and going out for a picnic, you need to consider a miniature version of the smokehouse. Such a product can be created using conventional washing machines. All you need is a drum to work. If you have a suitable part, you can start work. For convenience, use the following plan:

1. Remove the drum from the machine, remove all excess parts.
2. After that, close the bottom and top with metal plates using a welding machine.
3. Make a small hole on the side to allow a fire to build inside the drum.
4. You can make a special door that will be mounted on small hinges. This will provide quick and convenient access to the fire.
5. It is also necessary to make a hole for the removal of smoke through the pipe.

This option will look like a stove stove, the principle of operation is also similar. On top of the structure, it will be enough to install the grill using hooks. After that, you can start the smoking process.

Attention! The grill can be installed inside the drum or placed on top of the lid.

Electric smokehouse from the washing machine

If you wish, you can automate the process - this will save you from the need to constantly check the temperature inside the tank and add wood chips to the fire. To do this, use an electric coil for heating. You can create an electric smokehouse according to the following plan:

1. Install an electric spiral around the outer perimeter, attach it with special bolts.
2. Attach a special electric wire to the spiral for further connection to the power source.
3. Connect the equipment to the network, if necessary, adjust the strength and power of the current using adapters.

A further cooking process will be carried out as standard. Food is placed on the wire rack, which is smoked by smoldering sawdust and wood chips.

The power supplied to the circuit should be approximately 1 kW. If you doubt your capabilities, entrust the matter to a professional. Working with electricity can be dangerous.