Case for the tablet with your hands: from jeans and other materials

Progress does not stand still, and its development, we surround ourselves with more and more different devices. Many people can not imagine their life without expensive phone and tablet. But these devices are quite fragile, and without adequate protection, they can be easily damaged. The most important protection can serve as a nice cover for this subject.

But unfortunately, it is quite an expensive accessory, and not everyone is ready to lay out for him a tangible amount. Therefore it is better to build his own hands. This will not only save you money, but will also get the original, beautiful little thing. It will distinguish you from the crowd and show your outstanding skills in the best light.

To create you need to spend a little effort and time off. A materials in the manufacture can be found on his farm.

What is needed for the independent production of the cover

For any process is the basis of the preparatory phase. In this case it is the following:

• design definition future things;
• removal of measures and the construction of a pattern;
• choice of material and tools for creating;
• decor selection (optional).

Also need to be equipped with a comfortable workspace. On how comfortable it is and how you organize it, will depend on the flow of work and its outcome. To do this, select a level surface. Spread out on the material and tools so that they can be convenient to take, but at the same time leave free the central part.

Tip! When arranging your workspace provide adequate lighting. If natural light is not enough, set on the surface of a source of additional lighting (table lamp).

Which material is selected for the top

Another important point that needs special attention - is the choice of material. It may be based, depending on personal tastes and preferences of the future owner. But at the same time, it must meet the following criteria.

• It is quite dense.
• It is resistant to abrasion.
• The finished product must be easy to clean.

Materials and tools for the job

Based on the characteristics listed above, the following materials are better than others appropriate to the task.

• Leather, suede and leather. They can be purchased in the store. Or to use things from your wardrobe that you no longer wear: jacket, boots and so on.

Attention! Using the already second-hand material, you need to work to rip the thing to pieces and arrange on the details the elements of the pattern. This will make sure that the material is accurate enough.

• Dense fabric, denim. As in the previous version, you can sew a cover of old jeans.
• Yarn. Knitted cover will add zest to appearance and also serve as a stylish decoration.
• Beads. This material is good in that it is very easy to clean, resistant to abrasion and at the same time does not look just like an accessory, but as a present a stylish decoration.
• alternatives. For example, book or a tree. For the first variation, you will need the right size edition, which is sized pages. A central portion is then removed by size gadget. In this case, cut holes for charging. For a wooden version must possess carpentry skills.

How to make a bag with his hands

In order to understand the manufacturing process, let's look at it on a detailed example.

The simplest option - it is shaped like an envelope, bag or pouch with a valve.
To realize you felt need of the basic and additional colors, lining fabric, filler, padding polyester or a thin foam, scissors, a stencil, and a needle and thread, zip button.

Completing of the work

• Measure the width and length of your gadget.
• Carve material from the primary color rectangle. Its width is equal to the width of the device, and the length - the length of the two standards, plus stock on the valve.

Attention! When shearing add on the stock at the seams, and free play.

• Next, cut from the lining fabric like a rectangle.
• Then lay preform of felt underside uppermost. Next is a filler which closes the lining part.
• Stitch preform on each side a finishing seam.
• In the same way to handle the valve.
• Then go to the decoration items. To do this, cut out of felt decorations. You can perform this action on their own, and you can use the below stencil.

• Details of application with glue anchoring the workpiece.
• The latter set a hidden zipper. It is best suited for this purpose a secret button.

How to Make a Case with Stand

The tablet - a multipurpose thing. And often a simple case is not suitable to the user. So it makes sense to consider the creation of complex variations with stand.

This model is made of melange yarn, but to create it, you can use a string with a different composition and color as well as fabric.

To realize you need thick yarn in sufficient quantity, the right size hook, thick cardboard (instead it can be use pieces of plastic or polycarbonate), a knitting needle and fasteners \ a (zippers, buttons, velcro or button).

Completing of the work

• Measure the gadget in length and width.
• Tie the two rectangular parts. Their length is about two centimeters more than the length of the plate. A width equal to the width plus two standards 4 cm. As you can use any image as a tight pattern.
• From cardboard cut out two rectangles the size of the gadget. This carcass blank.
• Sew using knitting needles detail bases. In this position the inside of the carcass blank.
• If desired, can be added to the construct filler (sintepon or thin foam). It is placed between the frame and the front part. This will provide additional protection.
• You can also decorate the edge of the heavy strapping. Suitable "rachy step" or other dense edge.
• Then, at the corners of the inner rear portion stitch gum for fixing the device.
• Last set clasp. It can be sewn to the edge (lightning) or perform a strap (for buttons or buttons).
• Case can beautifully decorate decorative elements, if desired.