A broken power button is one of the most common problems for laptop users. This malfunction prevents the device from starting in the usual way. It is best to repair and replace the button, but not all the time there is the opportunity to do it at home or immediately take the laptop to a repair shop. You can enable the device bypassing this button, and you can do this in several ways.
How can I turn on a laptop without a button
The content of the article
-
How can I turn on a laptop without a button
- Boot menu
- Power on function
- What other ways are there to turn on a laptop without a button
It is not advised to disassemble a laptop on your own and try to fix a button that does not work if you have not previously worked with such devices. Incorrectly performed actions will damage other elements.
It is best to use the services of specialists or turn on the device without a button. In some cases, only the tip is broken, and the switch is in working condition. To start the laptop it will only be necessary to press the base of the button in any way possible.
Boot menu
Almost all laptops have a special button that, when pressed, allows you to activate a special menu. As a rule, it is located on either side of the case or on top of the screen and is pressed with a needle or finger. You can turn on the device in this way by observing the following steps:
- Carefully inspect the laptop case or search for a description in the instruction manual to determine the desired button.
- Locate a needle or pin if installed in the body itself.
- Press once and wait for the menu to open. A small blue window should appear on the monitor. Moving around the window with the keyboard arrows, find the “Normal Startup” mode and then press the Enter key.
After a certain time, the laptop will turn on successfully. Naturally, this button can be used all the time, but it is sometimes inconvenient and causes certain difficulties. Therefore, it is advisable to make certain settings in the BIOS.
Power on function
It is better to take care beforehand how to turn on the laptop if the start key breaks down. In addition, this method is useful for people who start using the Boot Menu. It is only necessary to specify certain settings, and it will be possible to turn on the device from the keyboard.
The main stages of action:
- Enter BIOS in any way.
- Find the Power menu. The name may be different depending on the manufacturer of the BIOS.
- Find the “Power ON function” submenu and set to “Any Key”.
- Next, you need to restart the laptop, but you must save before exiting.
By changing these settings, you can turn on the device by pressing any button on the keyboard.
What other ways are there to turn on a laptop without a button
Some laptops do not have special menu entry keys. Turn on the device without this will not work. But the launch can be done from the motherboard through the BIOS. To get to it, you need to disassemble the laptop case.
