How to connect two headphones to a computer at the same time: different ways

Often, users wonder if there is an opportunity on a computer to use two pairs of headphones at the same time. For example, sometimes you have to watch a movie together with complete silence, so as not to disturb others. If you are also interested in this issue, read our material.

Is it possible to connect 2 headphones to a computer

Unfortunately, in this case, you cannot connect directly to the computer. Basic software and connectors simply will not allow you to do this. However, for the convenience of the user, everything is always invented and designed. Now you can purchase a special device or install the program, then you will be able to connect with two pairs of headphones, but you will have to do a few steps, which are described below.

How to connect two pairs of headphones to a computer

The connection method will depend on the type of connection that your headset supports. If the headphones are wired, then you have to go to the nearest electronics store and ask the consultants for a special splitter. It is inexpensive, but there are also advanced, expensive options, with a more complex design and a set of additional functions. However, this is unlikely to be useful to the average user, the price category and reliability are important. The splitter also has certain disadvantages - the length of the wire. The vast majority of these devices has an excessively short wire, which makes it a little difficult to use, especially if the splitter is designed for more than two users. If this is a problem for you, you can buy an additional extension cord, it costs even less.

Using Virtual Audio Cable

Virtual Cable is a functional and rather useful software that will allow you to connect to your computer with two headphones, if they are wireless. First of all, we will need to download this program from the official website (do not trust pirate sites, you can stumble upon a hoax or a virus) and install it, in the process you will be applied step by step instruction. After a successful installation, you must complete the following steps:

1. Open the vcctlpan program and initialize the random audio or video that can be played on the computer.
2. Change the device that plays the sounds to Line Virtual. To do this, you need to go to the appropriate section "Equipment and Sound" in the control panel, or in the computer settings.
3. After that, the device will stop playing sounds with the support of the base system and transfer them to Line Virtual.
4. Turn on the audiorepeater program located in the Virtual Cable root folder and connect the Line Virtual device to your wireless headphones via Bluetooth.
5. Having duplicated the actions of the previous paragraph, connect the remaining headsets to Line Virtual. In total, you can connect up to four headsets.

Rulers on the screen will become an indicator of the correctness of all actions and steps, and sound will appear in the speakers. We hope that these tips will help you understand this issue!