Often, it can be seen that the headphones start malfunctioning carry out their function. Of course, this is not an indication that it is time to throw them. Pre-standing deal with the source of the problem. And most of all you can in this role are the different kinds of pollution. That's about it and will be discussed in this article. Consider not only the cleaning methods, but also know the obstacles that may interfere in the way of achieving a result.
What are the headphone
The content of the article
- What are the headphone
- How can we clean the headphone jack
- What you can not clean the connectors
You must first decide which type of socket. Therefore, identify several models:
- Mini-Jack, perhaps the most common type. Despite the fact that he appeared quite a long time, up to the present time it operates worldwide. It is worth mentioning that all personal computers, laptops and cell phones have called exit.
REFERENCE! Everywhere there are exceptions. Here - failure of Apple products on the use of Jack in the latest version of the device.
- Jack is also considered a fairly standard product. However, unlike the previous version, this usually applies directly to professional equipment. These include such inventions, such as electronic musical instruments.
- Micro-jack differs from the mini the connector represented in the amount of 2.5 millimeter.
- As for the usb, so this is a rare use. Most often it is used by the players. This is due to the fact that the representative has a lot of buttons, which requires a separate setup.
Thus, depending on the manufacturer and model structures can detect various types of connectors.
How can we clean the headphone jack
In the example, consider a method of cleaning a mini-jack with a hole of 3.5 millimeters. In order to achieve a result, it is necessary to adhere to the sequence of actions presented below:
- First you need to arm themselves with a toothpick, a small part of wool, a little alcohol. Pre do not forget to turn off your mobile phone.
- Further, the material to be wetted liquid.
- Then the resulting product can be inserted into the recess.
- At the end is a few times to make a rotational movement.
Thus, it should be repeated manipulations as long as the cotton will not appear clean.
REFERENCE! If necessary, it can be changed. In addition, there is another way:
- For this is useful to a cotton pad and plug directly from the headphones. So, now it is necessary to divide the article into two parts. One of them, which has a greater thickness, to moisten in an alcohol and wrap around the items.
- After that you can insert into the structure and also scroll on its axis.
Consequently, as in the first and in the second method should do all actions as carefully and cautiously.
What you can not clean the connectors
There are such moments, the implementation of which could lead to death or just a normal failure. Accordingly, below, and go about their speech:
- In no case can not use different kinds of water. Preference is better to give directly to industrial alcohol. That he is able to neutralize the existing contamination.
- In addition, it is not recommended to use in the activity of the hard parts. This is explained by the possibility of coating the inner surface damage.
- Regarding the use of specially vacuum or spray with compressed air: preferably ignore them only in those cases, if you have in the field of their special skills and knowledge application.
If you are having some trouble with the operation of this accessory, first we must check for the presence of contaminants. Since such acts cause of the most popular of all the other kind. Thus it is possible to detect poor contact between the connected devices. However, the pre-product can be attached to another work equipment, for example, to the same smartphone or a computer. Therefore, if the sound does not play or interference, then the problem is probably in the Plugged connector.