Bracelet from the headphones with your hands: how to make a bracelet from the headphones

Unfortunately, very often it happens that we buy headphones for mobile phones and other gadgets in the hope that they will serve us for a long time, but they are easily damaged. What to do in such a situation? Just throw them often pathetic. You should consider how you can adapt this accessory after it has failed.

Can I make a bracelet from my headphones?

From corrupted or new headphones, you can make a very attractive bracelet. All you need is a pair of headphones and a little inspiration. Consider a few options for such decorations.

Bracelet "copper braid"

For the manufacture of accessories you will need to prepare:

1. Headphones, should be fine outside.
2. Securing the future for the bracelet. You can buy it in the shop handmade. Outwardly, the two tubes are interconnected fastener.
3. Soldering iron with a small diameter tube.

Production of accessory costs to perform the following algorithm:

• With headphones, remove the plastic wrap, you should stay away from it only copper wires.
• To begin, do not remove the plug, it will require you as an attachment wires will not disintegrate.
• Start from the plug, divide the wire into three parts.

REFERENCE. Accessory get neat and beautiful, if all three strips are the same in thickness.

• Just a normal braid pigtail.
• You need to measure the circumference of your hand thus you define the desired bracelet length.
• Pigtail, which you get stripped to the desired bracelet length.

REFERENCE. From headphones usually obtained adding 4 pigtails.

• Carefully cut off the plug. At this stage it will be necessary to use a soldering iron. Well enough preheat it and oplaviv edge braids connect them into a single element on the edges. In the same way, attach the acquired in-store fixture.

Your unique accessory is ready.

Bracelet "nodules"

This is a very easy way how to make accessories out of old headphones. Algorithm manufacturing is as follows:

1. To produce necessary to prepare a working material.
2. Divide the wire from the plug.
3. Do not forget to Gaugeable circumference of your wrist, it will immediately determine the required length of accessory that you will weave their own hands.
4. According to the measured length make a mark on the wire, in this place, do the loop. Its size should be sufficient to ensure that in the future thread the accessory speakers.
5. Now cross your both wires together so as to form loops, one after another. Tighten them.
6. When the task set by weaving knots can be made to move to the final step. Mounting - Insert the dynamics in the first loop.

As you can see, to make such interesting accessories of seemingly useless things very simply, to cope with it even a child. There are also other weaving scheme, but for now we recommend you try these. They are simple in design, and you get an interesting result.

REFERENCE. Lead from the accessory can be hidden in the rubber braid or in a tissue, it is also interesting to SRAs.