Quite often there are situations when the iron is without any apparent reason ceases to function normally.
There are several common faults, which are quite easy to identify in the home before calling the wizard.
Common failure irons
The content of the article
- Common failure irons
- The reasons that the iron does not heat up
- The reasons that the iron is not stripped
- Advice on use of iron in order to avoid breakdowns
- Tips for fixing iron damage
- conclusion
Preliminary examination of iron considerably reduces the range of breakdowns search. It is necessary to inspect the body and make sure there are no cracks or defects.
The most common is the lack of contact to the power cord. Usually this happens because of the frequent excesses and substandard materials used in production.
The next frequency is the breakdown of the temperature regulator. In this case, the signaling light is on.
Fuse from overheating, the next item on the queue at the output frequency of the system. He forcibly opens the circuit. His breakdown defined simply enough iron upon reaching a certain maximum continues to heat up to the physical limit.
Rounding damage the heating element. If the iron is in working condition and with all indicators are normal then the reason is there.
The reasons that the iron does not heat up
The primary reason for the lack of heating is the breakage of the plaque. The heating element may burn or simply departed connecting wire. Sometimes this happens after the fall, but because of the lack of visible damage do not pay attention to in a timely manner.
Next reason for the lack of heating thermostat failure. Since, under the scheme, the current before it reaches the heating element, it is necessary to go through several fuses, one of which is the regulator.
In most cases, the regulator breaks down due to incorrect operation or due to mechanical damage.
Due to frequent twisting of the wire contact wires break and cease to fully transmit electricity, it can be a reason for the lack of heating.
The reasons that the iron is not stripped
The most common reason for the lack of steam is improper use. It was then iron instead of steam begins spurting water.
The second reason for failure of the valve, with proper use of the device. If the warranty period has passed, it is necessary to turn to the masters on home appliances repair.
Advice on use of iron in order to avoid breakdowns
Important! Avoid trite and common failures will help a careful reading of the instructions before operating.
It is necessary to closely monitor the cord, do not twist it to avoid cracking and fracture of conductors. Of course not to drop the unit, he will not say thank you. Before you clean the place of cool slightly, to not collect the condensate and non-corrosive. Be sure to wipe ostuzhennoy after heating surface. Do not leave enabled for a long time without being used.
Tips for fixing iron damage
Eliminate simple breakage and possible means at hand. With poor cleaning occurs functioning steamer acetic aqueous solution of 1: 200.
Of course, if the person does not understand the technology, it is advisable to call the master. Ask to repair the fault.
conclusion
Each failure requires competent approach as inattention or carelessness can result in, at best, a short-circuit.
Attention! Repair their own hands, without special skills is dangerous for your health.
