Consumer electronics requires high-quality and competent care. Also in need of care and iron. If this device has a stripping function, it should be poured the water, and what kind - can be found in this article.
Which water is best for iron
The content of the article
-
Which water is best for iron
- Boiled water
- Special water for irons
- Melt water
- Can I pour distilled water?
- Which water is best for iron
- What can not pour water into the iron
- Why add water in the iron?
- How does the water in the iron, and the quality of ironing?
Boiled water
This method of water purification is best known. But boiled water for iron - not the best option. Even in boiled water present, can upset the operation of the device.
Experts advise with boiled, add iron in demineralized water in a ratio of 1: 1. This method will protect the iron from scale.
Special water for irons
This fluid is found in the shops of home appliances. Special water helps when working with iron. Its main advantages are the protection of iron from scale and fabric - stain resistant. Such water is cleaned, wherein the composition is removed from the various impurities, which may affect the operation of the device.
Reference. Also, quite often possible to meet the water for irons with various flavorings. These flavors will surely give things a nice flavor, but may affect the performance of the iron.
Melt water
In liquids such origin contains substances that can stain. Certain substances affect the iron work in general. it is not recommended to pour this water into the iron.
Can I pour distilled water?
Distilled water is completely clean, and seemingly harmless. But it also has a lack of - relatively high boiling point. This characteristic may cause some difficulties during evaporation, there can be problems with the evaporator chamber.
Reference. Distilled water is recommended to mix with normal tap, in a ratio of 1: 2.
Which water is best for iron
How did you find out the most suitable for the ironing water is a special water for irons, irons that will not hurt, and things.
What can not pour water into the iron
The iron should not perfuse boiled, distilled water and melted. Such fluids would lead to scaling in the boiler, and a malfunction of the device itself. They also can damage things or leave them on the spot.
Council. In order for the device worked as far as possible, it is recommended to wash the boiler after each use iron. You can use the following medium: 1.5 liters of vinegar added in 1 cup of pure water. Such water is poured into the iron, shake and leave for some time. After, the liquid can be drained. This method will remove limescale without harm to the iron.
Why add water in the iron?
Most current models have a stripping function. This feature allows water to infiltrate the fibers of the fabric, after which it becomes softer. When the water begins to evaporate, tissue hydration occurs, hence reducing friction between the fibers. When the friction between the fibers decreases - fabric, smooth and easy to give in ironing.
How does the water in the iron, and the quality of ironing?
As mentioned above, the iron should be poured in a clean, filtered water. Plain water facilitates the formation of scale on the walls of the iron, as well as on its heating elements.
To fill the water used special glass. This cup has a folded spout through which water is not poured, but misses the iron. Some irons water hole is located on the handle.
M da. Clearly designed for those who are high school physics and chemistry forgotten. Stating that distilled water boils at a higher temperature than the water with the impurities can only ignorant or marketer (that liar). Distilled water at 1 atm. It boils at 100 c. FROM. Water with impurities having a higher boiling point. Teach materiel.
Not unlike the composition described specific shopping "special water for iron" from distilled, which by definition is still free from impurities and in what harm its use. Baby talk about a higher boiling point fell on deaf ears and leave on the conscience of the author.
