How to wash a washing machine - citric acid, vinegar and tips

The washing machine requires careful care, which will increase its service life. Rinse it regularly. This will help to avoid breakage and unpleasant odor appearing in the drum or sink.

How to wash a washing machine with citric acid

One of the folk remedies that helps remove limescale is citric acid. It is popular because of its efficiency and low cost.

Estimate the degree of pollution

Limescale is called solid deposition, in most cases calcareous. It is formed due to a chemical reaction that occurs when water is heated.

The higher the heating temperature, the more actively such pollution will begin to form. If the scum layer is quite thick, removing it will be more difficult. Therefore, the amount of citric acid will depend on the degree of contamination of the machine. Typically, 1 to 6 packets are required. It is recommended to take into account the dimensions of the machine.

Step-by-step instruction

It is important to follow the steps correctly to get the desired effect. Follow these steps:

1. Prepare the right amount of lemons. Pour everything into a powder container.
2. The machine should be empty. Remove all contents and check once again for something inside. Be sure to bend the edges of the gum.
3. Choose a program that runs at the highest possible temperature. Turn on the typewriter.
4. After cleaning, press the rinse again.

After completing the cleaning procedure, be sure to wash the drum. This will help get rid of balances.

Precautionary measures

The acidic environment is aggressive. Therefore, do not use the lemon method often. Acid can react with parts that the machine is full of. This will lead to a deterioration in its performance. This applies not only to aluminum parts. Rubber can also harden and begin to break.

How to wash a washing machine with vinegar

Another popular way to rinse a typewriter is to use vinegar. It also features low cost and efficiency.

Ingredients, Proportions

For cleaning, 9% vinegar is suitable. If it is not at hand, but there is an vinegar essence, then you can make a solution of it. The ratio will be 1: 7. One part of the essence and 7 parts of water. If vinegar is used, you will need one glass, about 250 ml.

Flushing technique

It is necessary to act as follows:

1. Remove all things from the drum. The machine should be empty.
2. Pour vinegar or prepared solution into a containerintended for powder.
3. Choose a programthat lasts the longest and has a high temperature. Turn on the typewriter.
4. Wait for the water to fill up, heat up and shift with vinegar. Pause the machine and leave it for an hour.
5. Then re-run the program and wait for it to come to an end.
6. After the end of the program it is necessary to remove particles of scale from the drain filter.
7. Prepare a special solutionby adding a few tablespoons of vinegar to a liter of water. Using a soft cloth prepared with a mixture, wipe the rubber elements of the machine and the drum.
8. Restart the machine without detergents.by selecting the shortest program. This will help get rid of residual contamination.

Important! Do not use rags when cleaning them by placing them inside the drum. Fabric fibers can clog pipes.

Precautionary measures

It is recommended to clean the machine, not only if necessary, but also for preventive purposes. Once every three months, similar procedures should be performed. But not more often, otherwise vinegar can harm the details. Do not combine vinegar with other cleaning products. The reaction that can occur between them will literally melt the elements from plastic.

Other methods and means of cleaning the washing machine

In addition to the above, there are other methods for cleaning the machine. Among them are special products that are not prepared on their own, but bought at the store.

Decalcifier

The dosage of the product is indicated on the package. It is recommended that you follow the manufacturer's advice on quantity precisely so as not to harm the typewriter.

When using anti-scale, it is necessary that the machine idles. There should not be any things in the drum. Anti-scale should be placed inside the drum and turn on the program with a temperature of 40 degrees.

Antinakipin is a chemical agent. Therefore, it is important when using it to protect hands with rubber gloves. If you do not observe accuracy, it is possible to get a chemical burn.

Calgon

The key objective of this product is to prevent scale formation. Calgon will not be able to get rid of an existing raid. It only softens the water, which helps prevent the appearance of scale.

In the kit, Calgon has a special measuring cap. It helps to maintain accurate dosage. If the water has moderate hardness, add 1/3 of the cap. For hard water, use 2/3 of its parts. If the product is in the form of a tablet, then the degree of water hardness will not affect the dosage.

The product is placed in the compartment for the main wash along with the powder. To increase efficiency, use Calgon with each wash.

Other special cleaning products for washing machines

It is worth noting other special tools:

1. Dr. Ten. It is a descaling powder.
2. Mr. DEZ. Suitable for deep cleaning. Differs in cheapness.
3. Tyrone It has the form of a powder. Helps remove scale. It is considered a budget option for Calgon.
4. There is no scale. The tool is suitable not only to remove scale, but also for preventive measures that will prevent the formation of lime mud.

How to wash a washing machine from dirt

In addition to scale, the washing machine can also accumulate other dirt during operation, which can affect the quality of the wash. Therefore, it is important to be able to clean its components from contamination.

Cleaning the chemical compartment

The compartment is pulled out and broken through with the addition of any cleaning agent. Proceed with caution, otherwise the rubber tube may be damaged. Then you need to choose a tool that will be cleaned from plaque and powder residue. A mixture of soda and vinegar is suitable, household chemicals like Pemolux.

The compartment must be covered with the product that was selected and left for several hours. After that, cleaning must be carried out using a sponge and a toothbrush. The latter allows you to get to inaccessible places. Flush the compartment and return it to its original place.

Drum cleaning

You need to purchase a special powder to get rid of scale and pour it into the drum. A compartment for normal washing is also suitable. Turn on the longest program. You can use citric acid in an amount of 100 g. The temperature at the same time choose 60 degrees.

Then you should take a sponge and wipe the drum itself and its rubber elements. Then it can pour a small amount of air conditioning into the compartment and start the machine, choosing only an additional rinse.

What remedies can be used for dirt

To get rid of dirt, there are special detergents, for example, Pemolux. Available tools are suitable, among which:

1. Lemon acid.
2. Vinegar mixed with soda.
3. You can add some water to soda and vinegar.

All this will help to save not only dirt, but also scale. Do not use folk remedies too often. But clean the machine regularly so that it works well.