Indeed, sometimes it happens that, acquiring a new induction cooker, the dishes may not be recognized. But what to do in such situations? This malfunction will be discussed in this article.
What cookware can the induction cooker see?
The content of the article
-
What cookware can the induction cooker see?
- What cookware does the induction cooker not see
- Possible breakdowns when the induction cooker does not see suitable cookware
- What to do if the induction cooker does not see the dishes
Let us dwell on the moment - what kind of material the device still recognizes.
- First, it should consume energy from the vortex field as efficiently as possible. Steel is ideally suited to this parameter.
- Secondly, the product should fit snugly to the surface of the plate.
Best if the mold is made of stainless steel. Everything will also work fine if you use cast iron or other magnetic metals.
In addition to the material, it is desirable to pay attention to special features. These include:
- A certain thickness of the bottom. The best option would be at least three millimeters.
- The diameter of the bowl should also have an appropriate indicator - more than 12 centimeters.
- The surface of the lower part itself must be smooth and even.
Therefore, when buying, it is recommended to look at the product carefully and not to miss the little things in terms.
What cookware does the induction cooker not see
As already mentioned above, the dishes must have magnetic properties, otherwise the recognition will not take place. If you use products that do not have these qualities, then the stove will not work at all. It so happens that the design does not see the capacity of the stainless steel, although in theory it should. This means that the composition of the product is collected from several different samples, that is, it is collected from impurities. And for some of them it’s not peculiar to magnetize.
On a note!
Copper, aluminum, glass, ceramic products are not recognized by most induction cookers.
In addition to the composition, the reason may be unsuitable dimensions - size and shape. If there are roughness and roughness at the bottom, then this is the source of the defect. Therefore, the dishes must comply with the described requirements.
Possible breakdowns when the induction cooker does not see suitable cookware
However, even taking into account all the recommendations, it happens that the appliance still does not see the dishes. Rather, the problem is not in the dishes. In this case, the reasons may be as follows:
- Maybe the aggregate does not support some alloys initially.
- If the burner on the left side does not work, then this is a problem with the wires. Right - with contacts.
- When the side does not work, it is likely that the connector has failed.
- The cause may also be significant contamination, in which the sensor cannot recognize the presence of an object on the surface.
- Damage can occur in the temperature sensor. Because of this, residual heat is not displayed.
- In addition, it is worth checking the control unit.
- There is a possibility that the induction model does not adhere sufficiently to the tile panel.
On a note!
A magnet can be used to check the operation of the burner..
What to do if the induction cooker does not see the dishes
First of all, it is necessary to determine why this is happening. Based on the cause of the malfunction, take further action. To do this, it is recommended to run special programs to test the device for operability.
- Of course, the first thing to do is to check the case of the dishes, whether it is designed to interact with a kitchen appliance or not. That is, a special designation should be found on it.
- In case of inconsistent adjacency, the distance should be adjusted using springs.
- The temperature sensor will have to be replaced if the source of the defect is in it.
- For a complete conviction of the correctness of finding a deficiency and its elimination, it is advisable to contact a special service.
