How to make a wired DIY keyboard from a wireless keyboard

In life, sometimes it may turn out that one or another device you want to convert. In addition, self-assembly of parts gives a lot of pleasure, and in the future it is also a reason for pride. Thus, in this article, we consider the principle of the keyboard with no wires in its presence.

Can I make a wired keyboard wireless?

Thanks to modern technologies and the special knowledge of some masters, today the named procedure can be carried out not only independently, but also at home. However, it is important to consider the specifics of each action. This will be discussed later in the article.

Of course, further manipulations should be thought out beforehand. Therefore, the following are the steps:

• First you need to arm yourself with the necessary components, that is, a donor keyboard (the cheapest), a board and a screwdriver.
• Next, unscrew all the screws from the structure and remove the top cover. After that, isolation of various compounds occurs.
instagram viewer
• The next step will be wiring-attaching switches.

REFERENCE! Wiring must be done carefully.

• The path itself, which is located on the membrane, must be long to avoid possible intersections. At the same time, on the controller, it is necessary to mark the corresponding switch for each of the 26 contacts. And then connect them all together.
• After soldering, it is advisable to double-check the serviceability of the bottom.
• Now you can activate the battery and do instant testing. This is necessary in order to find out the presence or absence of certain problems. If a possible defect is found, you will have to go back to the previous steps and check the structure completely. And now, when absolutely all the keys are tested for functionality, you can proceed to the end of the procedure.
• Thus, you can make sure that there is still free space directly inside the equipment, and then reproduce the placement of the subsequent components of the system.
• Internal parts and batteries should be installed in the proper place for them. Any plastic part can be used to embed the cover.

Which is more convenient: wired or wireless keyboard?

In order to deal with this issue as accurately as possible, it is worth touching on the pros and cons of the two devices. Thus, to begin with, we find out information about the design equipped with a wire:

• She does not need to charge batteries, however, the length of action is significantly reduced;
• It is considered more reliable in operation, as well as failure-free.

As for the device with the absence of:

• Mobility;
• Ease of use, as it allows you to work at a distance;
• The likelihood of regular battery changes;
• Sufficient high cost.

Thus, we can draw the following conclusions: if you want the performance to be on an ongoing basis, then the choice will be in the direction of acquiring a wired keyboard. If you can afford the budget, and you want to be away from the workplace and at the same time interact with the PC, then prefer a different representative.