What can be done from the old system unit: original ideas

Very often, people simply throw out obsolete equipment because of their uselessness. However, there is an opposite category of people, which retains even broken equipment, which can not be restored.

People do this for the reason that they understand that something truly unique and useful can be made from old technology. So, for example, from an ordinary personal computer that was used more than 10 years ago, you can make many interesting decisions - both for home decor and for effective use.

Mailbox

Perhaps the mailbox is the simplest thing that can be done from the old system unit. To create this item, it is enough just to have front and side parts of the body. If there are component parts inside the case, then they must be carefully pulled out without damaging the equipment walls. It is necessary to remove all parts, with the exception of the drive cover, as this will be the main structural element.

The manufacture of the box is very simple, it will be enough to have a good processed bar, the case itself and several fastening elements. The product creation process itself is carried out in several stages:

• Digging the bar into the ground - this will be the supporting pillar;
• Installation of the housing on a pole;
• Fixing the case: this is best done with small screws, but it is also possible with ordinary glue;
• Removing the drive lock - this place will become a compartment for receiving mail;

As we see, to create such a useful device, it took very little time, and a minimum of detail.

Important! To make the post more durable, it must be poured with cement with a thick structure. At the same time, the pillar itself must have a wide and stable support - it can be laid on top with pieces of brick or rubble.

Bedside table

Technically, the nightstand will be a little harder to make, but the end result is worth it. There are two manufacturing options: the bedside table can be designed as a small footrest, or a full-fledged product, with the ability to store various items.

In the first case, it will be enough to attach the legs to the device so that it is more stable - you need to do this in a horizontal position so that there are four fulcrum. For beauty, the stand can be covered with any thin fabric material, with a good design.

In case it is planned to manufacture a full-fledged nightstand, it is necessary to remove the side cover of the case, as well as remove all components. On the inner wall we attach two wooden shelves - the bedside table is ready. You can also hang the product on the wall - this will be a practical and useful item that does not require additional space.

Little table

Not everyone can make a table, since the system unit must have a relatively large size. For owners of compact and portable devices, this method will simply not be relevant, since it will turn out to be too small a table surface.

To make a coffee table out of the system unit, or just a miniature interior item, you need to choose a good supporting leg. Experienced craftsmen can make a floor lamp, but this requires the subject itself and the skills of working with metal.

Reference! If you still managed to make the leg, then you just need to remove the side cover of the block and fix the structure well. The outer side should be closed, without the presence of holes for coolers.

Mini greenhouse for seedlings

To make a greenhouse, it is better to use old models of personal computers that do not have openings for coolers - this will provide the best heat dissipation. Also, the case material must be made of plastic, since the iron structure is much more difficult to warm up.

After the device has been successfully selected, it is necessary to close all the connectors and openings with impermeable material. A warm cloth should be placed on the bottom of the structure so that it retains heat. After that, you can fill the walls with earth and transplant seedlings.

BBQ

Brazier is made from modern computer models, which are 100% made of steel. The manufacturing principle is very simple, since it is enough to remove the side cover and install small clips in its place. These elements will be designed to fix the skewers.

Installing the legs is not necessary, as the grill can be installed on any surface. Moreover, due to its light weight and small dimensions, the product can be easily transported, washed and cleaned of coal residues.

Any plastic elements, if any, should be removed. Otherwise, during cooking, molten residues can get into food, which will result in poisoning.