How to charge the xbox one joystick: charging methods

Externally, the gamepad for the Xbox One is not far from its predecessor, the Xbox 360, but the technology has undergone a lot of changes. Ergonomics have been improved, taking into account the vast experience of the company in the field of game consoles. High-quality plastic was used, respectively, higher reliability was provided. And most importantly, energy consumption has been optimized. In the article we will analyze in detail the device of the power system, options for its replenishment.

When to charge

First, let’s figure out how to understand that the game controller needs to be powered. In the upper right corner there is an indicator that is familiar to everyone who has a phone. A small battery indicator. When the level comes to an end, it will turn red. This will be a signal to replenish the joystick.

IMPORTANT! When connecting multiple devices, the indicator will display the level of the gamepad with the Xbox button pressed.

If the controller is connected using a wire, the indicator will display the plug icon for the outlet. It doesn't matter what type of battery you use. Even if these are alkaline batteries, the indicator will show their level.

Xbox one joystick power supplies

The standard Xbox One wireless joystick that comes with the box comes with without battery or batteries.

Batteries

It will work fully when connected via a USB cable. But to use the wireless version of the work, you have to buy batteries. Ordinary AA (finger-type) batteries can be used as a battery.. But they cannot be updated, each time you have to buy a new kit again.

Battery

For convenient use of the gamepad, the manufacturer suggests using branded battery and special accessories.

The branded battery has a capacity of 1.4 A * h, which allows you to continuously use the controller for 30 hours. The whole process takes only 3-4 hours.

Cable

Used for charging regular USB – microUSB cableIt also comes with a battery pack. The length of this cable is 2.8 m.

For comfort a light indicator is installed on the connector, which starts to glow at the beginning of the procedure. The process of recharging via cable does not interfere with the full use of the gamepad. All clicks will be transmitted through the wire at that moment. This allows you to use the Xbox One game controller even with zero charge.

IMPORTANT! You can use a regular USB-microUSB cable for charging, which you use for your smartphone or any other electrical equipment.

There are also batteries created by other companies. But using them is not recommended. The quality of such products is often very low, which can lead to damage to the internal electronic components of the gamepad.

How to charge the xbox one and xbox one s joystick

To increase the charge level of the controller, you need to carry out a number of simple steps.

• First, connect the USB cable to the port located on the front of the joystick.
• The opposite end of the USB cable is connected to the port on the front of the game console.
• Turn on the Xbox One to start the process. Unfortunately, it will not be possible to charge the gamepad when the console is off.
• During the process, the LED located on the wire will light up in orange. This will indicate a successful battery charge. And when it reaches 100% energy level, the LED will turn white. During charging, an icon showing the level on the screen will begin to give out animation.

Additional Information

• If you use a non-original battery, you must use the method that the manufacturer of this device provided. Otherwise, this can lead to damage not only the battery pack, but the entire gamepad.
• To work with the original device optional use console. The USB port of your personal computer or charging for the phone is also suitable. You can use any other USB cable. But in this case, the full charge time may differ from those described by the manufacturer.