The PS3 game console does not provide a wired connection to the joystick. It works on batteries, which last no more than 12 hours. After that, charge is required. Knowing the various process methods will help you choose the most suitable option.
Ways to charge the joystick without a console
The content of the article
- Ways to charge the joystick without a console
- Joystick charge risks without prefix
- What difficulties may arise
SONY is one of the largest representatives of the computer gaming industry. One of its well-known products is the PS3 game console. Fans of computer games are able to spend many hours behind her. In this model, the connection between the console and the joystick does not use a wired connection, but Bluetooth. Long work leads to the fact that the battery of the joystick comes to an end. To continue, it must be replenished.
When the charge runs out, the indicator lights on the device begin to flash. Now you need to charge. This can be done not only by connecting to the console, but in a different way.
Included is a cord for connecting the device to the USB port. With it, the joystick is connected to another device in which there is a corresponding connector. For this purpose, you can try to use:
- a computer;
- TV set;
- laptop.
When connected, it may turn out that in some cases, recharging will not occur. In this case, you need to try to connect to various devices. To determine how long it takes charging, you need to consider that a current of varying strength can pass through USB. The larger it is, the less time this procedure will take.
It is possible to recharge the battery by connecting to the outlet through the device. In this case, it is necessary that it matches the joystick in electrical parameters. For a battery, it is best suited if the voltage is 5 V and the current is 400 mA. Some devices are rated for less voltage than indicated here. This will not interfere with the recharge procedure of the joystick battery, but will only make it slower. Exceeding the 5 V limit is not acceptable. The magnitude of the current can be either less or slightly more than indicated.
You can also use an additional device (for example, PS3 Venom), which will increase the operating time up to 20 hours.
Joystick charge risks without prefix
If the device used has an output voltage exceeding 5 V, the joystick may burn out. Therefore, it is necessary to make sure that this situation is excluded before making a connection.
Sometimes when connected to devices that have a USB port, battery charging does not start. In this case, you need to try other methods.
What difficulties may arise
If you have any difficulties while charging, you need to try to apply other available options for its implementation. To do this, try to connect to other devices with a USB port, try to use a device with the appropriate parameters.
It must be borne in mind that the process may not begin immediately after switching on. In some cases, the delay may be more than 5 minutes. It is recommended to wait a while and make sure that the indicators stop blinking, which indicates that the battery is low.
If none of these methods work, you need to check the joystick. To do this, it is connected to the included console using a wire. If charging occurs, this indicates the serviceability of the equipment. Otherwise, you must contact the service center.
Charge the batteries on time. So, you can spend many hours at your favorite console, without fear that the joystick will disconnect at the height of the game.
