How to connect the joystick from the PS3 to the PC: via Bluetooth, using the application.

All gamers can be clearly divided into two categories: those who prefer to use the console and those who choose PCs for games. Despite the fact that the number of exclusive gaming applications released only for consoles is impressive, most gamers use a personal computer. However, they appreciate the convenience of the controller included in the kit.

Is it possible to connect the gamepad from the PS3 to the computer

It is quite possible to connect the controller from the Play Station game console to any modern personal computer or laptop. Moreover, the procedure for connecting two devices is very simple and will not cause any difficulties even for an inexperienced user.

To connect the controller to a personal computer, you will need:

• USB wire for connecting to the system unit;
instagram viewer
• Bluetooth adapter - if the gameplay will be carried out using wireless technology;
• A special program that helps the operating system recognize the connected device.

Also, before connecting the controller to a PC, you will need to download and install all the necessary drivers.

REFERENCE! If before you had to search for programs and drivers yourself, now Sony has an official application where you can download all the necessary utilities from.

The most popular program is Motionin Joy. Its installation does not cause much difficulty:

• from the official site you need to download the program, and then install it on your computer;
• connect the gamepad with a USB cable to the system unit;
• run Motionin Joy;
• go to settings and find the item Driver Manager;
• the program will offer a list of available drivers - in it you need to find the right one and install it by clicking Load Driver;
• then go to the Profiles tab and select Select one mode in it;
• checkmark Custom;
• save all changes and exit.

This program also allows you to set individual user settings.

How to connect a PS3 joystick to a PC via Bluetooth

Wireless connection is convenient in that the user will be spared from additional cables. This allows you to play with great comfort.

Before directly connecting the controller and the personal computer, it is necessary to perform the above manipulations. Then connect the joystick to the system unit via Bluetooth.

Next, you need to perform the following steps:

• run the installed Motionin Joy program;
• Find the “BluetoothPair” item and the “Bluetooth” tab in the settings;
• find the required bluetooth adapter and click on the “Pair Now” button;

If everything is done correctly, then after a short period of time the controller will begin to vibrate. This is an indicator that the device synchronization procedure was successful and that you can start the game process.

ATTENTION! The procedure for connecting devices does not depend on the installed operating system - for all operating systems, the connection steps will be the same.

In rare cases, Motionon Joy does not recognize the controller. To fix the problem, you must:

• check the serviceability of the USB cable and the correctness of its connection with both devices;
• pre-run the utility, go to the “Driver manager” tab and only after that attach the gamepad to the system unit.

How to connect a gamepad to a computer using the application

An alternative way to connect the joystick to a computer with Windows is to use the DualShok 3 emulator. The process of connecting devices is somewhat different from the above method. For example, you will need to download and install several additional utilities.

The connection order itself is as follows:

• Download the Sisaxis driver program;
• install the application on a computer - to do this, you need to initialize PPJoy and LibUSB;
• unzip the BtSix archive;
• connect the bluetooth adapter and update all drivers;
• run Config Joystiks located in PPJoy;
• add a new device to the list and give it any name;
• if necessary, make individual user settings, which will need to be saved and only then close the program.

For the controller to work correctly, you will need to synchronize it with the Bluetooth Dongle. This is done as follows:

• Bluetooth Dongle is connected to the system unit;
• The BtSix program starts;
• the button located in the middle of the utility is pressed.

ATTENTION! The application must be unpacked before launch!

After all the steps are completed, you should check the operation of the gamepad. If everything was done correctly, then the device will begin to work.

Connecting a joystick to a computer and setting it up is quite simple. The main thing is that this was the original Sony product, and all the steps necessary for the connection were performed correctly.