How to use a washing vacuum cleaner: washing and dry cleaning

Increasingly, one can hear about household appliances such as washing vacuums. They were the result of progress in the production of household appliances. However, the constant emergence of new models sometimes leads consumers into difficulty. It can be very difficult to understand the variety of species available on the market. Questions arise: how to use them and why they are needed at all.

In our article, we will talk about how to use a washing vacuum cleaner in everyday life.

Capabilities of a Vacuum Cleaner

A washing vacuum cleaner has many different functions. It can be safely called universal, because It is suitable for both wet and dry cleaning..

This is his main advantage.

Such a device you can clean almost the entire apartment without much effort and with great time savings.

Preparation for work

Before starting work, you will need to perform elementary manipulations.

Tip. At first use, first look around the device and check for all accessories.

If everything is normal, you can start the preparation itself.

Water filling

• Carefully read the instruction manual.
• This device is present two water tanks - clean and dirty. You need pour water into the smaller one. Be careful because the dirty water tank is usually not much larger.
• Detergent is not always added, you need to clarify this in advance in the instructions or from the seller in the store.

Assembly

Then you can assemble the device and attach the remaining parts.

The work is performed in the following order.

• Nozzle put on on flexible hose.
• Shlang insert to a special connector.
• Cord connect to the network.

Nothing complicated here. Therefore, all of the above procedures will probably take you a little time.

IMPORTANT! Remember that if the volume of the water tank is small, then there is a possibility that during the operation you will have to add liquid to it one or several times.

For this the device will have to be disassembledb. therefore It is better to pre-select a device with a suitable volume that will allow you to complete the cleaning of the room without adding water.

Application

The functionality of this unit significantly exceeds the capabilities of a conventional vacuum cleaner, which is usually used only at the preliminary stage before wet cleaning.

His washing brother is distinguished precisely by the fact that he combines the ability in both of them. Let us consider in more detail its capabilities.

Washing and wet cleaning of various surfaces

What to wash

It is worth remembering that with all the advantages of such an aggregate, it can be used with respect to not all coatings. For example, it is strictly forbidden to clean parquet or natural pile carpets with moisture, as it penetrates into them, and these coatings begin to rot from the inside.

But no problems will arise with the following surfaces:

• linoleum;
• fake carpets;
• laminated coatings;
• stone;
• ceramics;
• glass;

IMPORTANT! Before starting cleaning, make sure that the surface is resistant to moisture and does not deteriorate from using the appliance.

If everything is in order, then you can begin to act.

Mode of application

• Fill the tank with clean water, assemble the device as described above.
• Then treat the entire surface. Begin washing from the corner by controlling the lap brush.. If there is a need and the technique has no prohibition, use detergent.
• If there is a lot of dirt on the floor, then a little more mixture will be needed.
• Then clean the floor with clean water.
• Thereafter you can start drying. To do this, use a nozzle with a suction effect..

Thus, in just a few minutes the surface will be cleaned of dust and dirt.

Dry clean

The principles of dry cleaning have been familiar to us since the widespread use of ordinary vacuum cleaners. Therefore, it is still more simple.

The difference is that in this mode of operation, water does not need to be poured.

To you also need a nozzle with a suction effectI.

Walk over the entire surface once or twice with the vacuum cleaner turned on at full power - there will be no trace of dust.

Useful tips for using washing vacuums

• A device’s package usually includes a large number of different nozzles. Take the time to look at them all and find out what each one is for.. This can make your house cleaning easier.
• Crevice brushfor example will allow clean even the most inaccessible places.
• Particularly advanced models can even be equipped with plunger nozzleby which pipe cleaning possible. This once again emphasizes the indispensability and need for the economy of such an aggregate as a washing vacuum cleaner.
• Over time, something may go wrong and the power will noticeably decrease. Before you panic, do a few simple operations that may help identify the problem and fix it at the root.

1. Take out the dust bin and inspect it.
2. Rinse the bag with a special solution.
3. Clean the remaining parts, paying attention to each.

And remember that after each use, you need to clean or just wipe the most vulnerable areas of the vacuum cleaner - dust and water tanks. They may become damaged or so dirty that the device will stop working.

Now you know how to use such a wonderful invention as a washing vacuum cleaner.