How to remove the sealant bath at home: how to remove the sealant from bath

Silicone sealant is easy and convenient to apply. It perfectly protects against the penetration of moisture, but to remove it - real torture. It is very well adheres to any surface, and will have to try very hard to clean, and chronic silicone and the surface left untouched.

Methods for removing sealant from bath at home

Newly applied silicone removed quickly and easily. If by chance, you are soiled with silicone surface of the floor or something else, it is easy to wipe off with a sponge or a piece of old cloth.

The more rough the surface, the more difficult to remove sealant. If it is struck properly, it is almost a stranglehold gripping the material.

If your plans include a second application of silicone, it is necessary to try to clean up old without a trace. Old and fresh silicone between a virtually concatenated, so remnants of the old sealant will create loopholes for the flow of water.

To clean the old layer of silicone can be combined mechanical and chemical cleaning methods.

Since the silicone itself is not ototrotsya, will have to work hard. Therefore, you should start it with a mechanical cleaning method. Try to remove as much as possible a thicker layer - chemicals removed only minor residues.

mechanical cleaning

To remove the sealant will be needed:

• stationery knife;
• the blade of the razor;
• spatula small size;
• tweezers;
• flat screwdriver;
• scrapers for removing silicone;
• pumice.

Reference! It is possible that some of the above will not be necessary, but better to have everything at hand. Who knows what will work effectively.

The sequence of execution of works:

1. Knife cut away the thin silicone strip. If the material is not completely cured, it is possible to remove it in one motion.
2. Using tweezers grab the notched edge and separates it.
3. Spatula cleans debris.
4. Silicone forceps must be removed from a variety of fractures.
5. The remaining thin layer of hard to remove, may be useful here fine sandpaper.
6. To remove residues from the tile layer must make an incision and then rub eraser or pumice.

chemical methods

Mechanical methods can not remove all the old stuff, comes to the aid chemistry.

When choosing a removal means should determine the type of sealant. They are based on the acid (determined by the presence of the characteristic smell) and neutral.

You can try to remove the sealant with the means that are readily available - use, such as mineral spirits.

This universal solvent. Spray the cloth and wipe the appropriate places. Leave for ten minutes, so that the liquid absorbed. If everything will turn out, the silicone is soft and can easily be removed.

Reference! Industrial drugs destroy hermetic structure. They can be found in automotive shops, car chemicals department and in DIY stores.

The principle of operation of all the staff is unchanged:

1. Following the mechanical cleaning means is applied over the remaining layer.
2. Given a certain time (read on the package), the solvent worked. Thereafter, the soft sealant amenable to further remove.
3. The majority of solvent traces remain. These places need to wash with soap and water - to put it, wait for a while and rinse with water.

How not to spoil the surface

To avoid having to restore or replace plumbing trim, remove the sealant should be slowly and carefully. Especially carefully it is necessary to act, clearing acrylic bath: its surface is easily scratched even ordinary sponge. Remember safety:

1. Use caution when working with sharp objects. Not only that, you can scratch the surface, you can easily and injure themselves.
2. On the surface of the acrylic sealant is best to remove eraser wet pumice stone, wood bar.
3. If the sealant has very long-standing and does not give the blade, it should first be softened by industrial solvents.
4. Do not use brute force.

By following the above recommendations, you can easily and quickly remove sealant from bath.