DVRs are not only car drivers but also nearly all the places that need protection. Connection of this device to the PC or laptop will allow to conduct direct observation for multiple points.
How to connect the DVR to a laptop
The content of the article
- How to connect the DVR to a laptop
- Can I connect without wires?
Connect the DVR to a laptop will be able to virtually any user who does not even have the professional skills. There are several ways to connect the camera to a stationary or mobile computer.
Through wire. A wired connection will require working Internet connection. Methods wired connection:
- Via a network cable. It is necessary to combine via patch cable (used to connect the router to the PC processor, do not support wireless communications) an inlet connector and a corresponding registrar laptop. If no appropriate hole on the computer, you have to use an adapter. After that, the laptop will have to penetrate into the control panel and select Network Settings section. Now came the turn of "Network Connections." Now two clicks on an icon "Local Area Network". A new window opens, where it will be displayed a list of all connections used by the network. This list should scroll down to the end, select "Internet Protocol (TCP / IP)», click RMB and click "Properties" from the drop down menu. In this window you need to enter the coordinates manually. For the registrar is IP (192.168.0.100) and subnet mask (255.255.255.0). After the adoption of changes to the camera will start to work.
- Connecting via a router. So called original "adapter" for connecting several devices to a computer or a laptop. In order to integrate the PC and so the camera observing need to connect the device to the adapter with a network cable, then the router itself inserted into the inlet of the network board.
- Connecting the PC-based. Certain models are equipped with internal modules, which make them available for some models of laptops or personal computers. In this case, the action when connecting are as a standard installation of drivers and expectations sihronizatsii operating system and camera. Most likely, with this method you will need to install the browser Internet Explorer, as virtually all registrars are sharpened for him. To find out about the possibility of such a connection, it suffices to read the instructions from the registrar and look at the list of models supported by the program.
Can I connect without wires?
Messing with wires very few people want, so the developers have provided a way to connect the DVR for Wi-fi. For this you need a router that supports wireless connection, and the corresponding camera. The router itself can be combined with a laptop using a network cable, if that does not support Wi-fi.
In the presence of the Ethernet module installed in a laptop or netbook, you can also use a wireless connection using a router or modem. These network devices must be connected to the notebook or otherwise. The Video Recorder menu is enough to select an available network and configured to communicate through the computer.
