How to configure the touchpad on a laptop: switching on and off

Many users did not initially recognize the touchpad due to its inconvenient functional. However, after some time of use you will notice that this function becomes familiar and comfortable. There may be circumstances under which it is necessary to disable or activate the technology. For information on how to do this will be discussed in the article written.

How to disable and enable the touchpad on a laptop

There are several options that will cause the function to work, or to the opposite state. Consider the most common ones:

• In modern models can observe a certain groove immediately adjacent to the sensory part. For example, by double-clicking, you can interact with it. If there is no such notch, just go to the next step.
• Absolutely key «Fn» can be found on each laptop keyboard. You will also find remains in the range from F1 to F12 button with the appropriate mark. Thus, when pressing a play action will be performed.
instagram viewer
• Perhaps that would have to go into the structure of the BIOS. To do this, it will be necessary when the unit go to the menu and select the area under the name «Pointing Device». There you can find the desired device. But in order to activate the need to click on Enable. If we want to disable - Disable. Finally do not forget to save your changes while holding the sequence of F10.
• If the above-described manipulation does not fit, you should double-check the presence of the driver. You will need to go to the "Control Panel", go to Start and select "Device Manager." After that, the "mouse" to find "the touchpad" line and see the information provided. In case of failure of drivers you want to play update or install them.

Reference! It is understood that if the switch is not at the expense of all possible methods, you will have to contact the service center. Since the matter is in the malfunction of the equipment.

How to configure the touchpad on a Windows laptop:

Depending on the version of the operating system, the outcome of events may differ slightly. That is why the sequence of actions should be dealt separately.

Windows 7

Pre-worth finding out how to get to the field parameters.

1. We have already mentioned, how to open a layout associated with the touch portion. It is necessary to select "Properties" to further the name of the device, press on the parameters. There will be plenty of opportunities available. For example, you can disable or enable scrolling «ChiralMotion». It is especially useful when you scroll through a long document.
2. In addition, in some models, there is a multi-touch, allows you to use multiple touch.
3. A particularly important criterion is the sensitivity. If you wish to adjust the product, so that it responded more or less, be sure to check out the said figure.
4. It may be provided with locking technology. It often happens that when you print a user accidentally touches the area. Thus, it is able to abandon the reaction.
5. Additional adjustment involves the tracking speed and quick scrolling.

windose 10

Changing values ​​are also made through the built-in system performance:

1. Through the "Control Panel" is achieved access to the window "mouse". Then better to address under "Settings".
2. Should open tab with general information. It should move the slider to the desired position for you. Also there is the "default" button. With the help of automatic set value, wherein the previous canceled. The main thing - to preserve the completion of the change.
3. In addition, it makes sense to view the popular gestures. They allow to completely replace the functionality of the accessory. To scroll through the pages, you need to hold the up / down or left / right with two fingers. The allocation of a double tap handy shortcut menu to display the search engine - a triple-click.

Therefore, in each version, you can not just turn on their own kind of touch input submitted, but also make settings "under him."