Adjusting the hinges on the cabinet door: vertical way adjustment on the plane, set the height of doors.

During arrangement of the apartment it is important to choose furniture that is not only suitable for the interior, but also be comfortable, high-quality and controlled as possible. Then it will be possible to set up at its own discretion. Very often people are faced with the need to adjust the hinges on the cabinet door. Such a function may be needed when moving and when another planning things will settle down in a new and simple reconstruction of the apartment.

Options for adjusting the hinges on the cabinet door

There are several options for adjusting the hinges. All these manipulations are performed quickly enough, even in the absence of skills or experience, because it is a very simple task. First, let's deal with all the ways to explore each of them and select the most suitable for themselves. In total there are three adjustment method:

• vertical;
• height adjustment of the door;
• on the plane.

Each of them has its own characteristics, which should be considered when choosing.

vertical adjustment

Usually resort to this method in the assembly of the newly acquired furniture or when there is a fair amount of distortion, the doors are located one above the other and so on.

The first step will be the removal of plugs, if any. The bolts are tightened around the edge of the sidewall, and are put on the same level. This detail, which perform the function of securing and providing the vertical position of the furniture front.

After that you should close the door and check its current status. Such an analysis will help to understand exactly what should tighten the bolt. For example, if the upper angle is tilted to the right, upper loop must tighten and loosen the bottom vice versa. After each step, it is necessary to evaluate the location of the facade, and repeat the procedure until, until everything will hold.

In this vertical adjustment ends. After she usually go straight to the adjustment of the height of the door. But it is possible that after studying this method, you decide that you do not need it.

Setting the height of the door

It should not make mistakes and do everything carefully, so as not to spoil the furniture. Door height is set using the two small screws, planted on the elongated ears. Through these stretches loop.

The first thing to do is loosen the screws. Then the front part is set higher or lower, depending on such as the one you want to see her. After that screws are tightened. At this all work is finished.

IMPORTANT! Before you start adjusting the pick up screws fine thread. With their help you will be able to install the door to the desired height and will not have any problems with this furniture.

Setting up planes

Thus, you can easily adjust the location of the door in the plane, as well as to correct its loose fit to the body of the cabinet. It also happens that the door just bounces when you try to operate it for its intended purpose. But do not worry - everything can be changed by following the few simple actions.

The second bolt, which is located in a loop, you need to scroll toward you, and then check for the gap between the facade and the door of the cabinet. If necessary, the action should be repeated as long as things are not back to normal.

ATTENTION! When this procedure is best to use a Phillips screwdriver. It is also important to be as accurate and do not damage the screws, because the consequences can be very sad, and to fix them on their own will be difficult. Then you have to seek professional help, and this is a waste of money.

Three of these methods are different in many ways, but at the same time with each of them, it is important to follow some general rules. For example:

1. Follow the sequence of actions to accelerate the process and does not confuse them. First, align door height, and then adjusted according to the formulation.
2. Before you start, check that the cabinet stands on a level in all views. If not, should it reach such a location, or adjust the loop will be very problematic.
3. It so happens that it is impossible to reach the desired level. In this case, you need to pay attention to the distance between the doors, but it is important that in the cabinet at this time was an acceptable number of things. If it is cluttered, the gap will increase significantly. In the normal state, it should not exceed 5 mm.
4. Check and additive facade under the cup. If it is incorrect, then the adjustment to engage can be very problematic, because will have to adjust the first loop, which greatly slow down the process may seem complicated procedure for those who are not too versed in the device cabinets.

Care accessories for continuous operation

In order to furniture lasts longer, it is important to take care of it. Compliance with a few simple rules will help to achieve its high wear resistance, which will significantly save money on buying new things or repair old ones.

Now, remember that after the end of the installation, all the screws should tighten as much as possible tighter. So they do not become loose longer, and the entire structure will be stronger. This rule applies not only to loop the kitchen and wardrobes, but also other furniture.

Purchase a special thread lock to be bring to the heads of the adjusting screws. In his absence might be useful and oil paint or enamel.

Maybe so that the screws from the constant twisting will be broken. Then you have to unscrew them and drive a hole in the wooden Chopyk. After that you should return to the fold hinge.

In the care of a wardrobe and a soft closing hinges on its doors there is nothing complicated and require additional time or resources. On the moving parts of joints need to occasionally drip lube not only to extend the service life, but also prevent the emergence of future unpleasant squeaks or jamming, which can spoil the impression of the operation and provoke. Note that the excess oil should be removed immediately - they can accumulate dust, and dried grease will look sloppy.

Now you know not only about how to properly adjust the hinges on the cabinet door, what does it do, and in what ways performed, but also about the rules of care accessories that are guaranteed to save you from the constant hassle associated with furniture.