How to assemble the siphon for the sink in the kitchen: the device features and operation of a siphon

The shell is an integral part of every kitchen. But that they could be used, you must install additional items of sanitary ware: tap, siphon. During operation, the latter is often clogged with the remnants of food, which leads to clogging of water drainage or violation. In this case, the need to clean or replace the siphon.

In this case, the assembly device - a simple procedure for the implementation of which does not require a challenge to master. It is only necessary to choose the appropriate option and follow the instructions of the product clearly.

Features of the device and the principle of the siphon

Siphon Basin - plumbing element designed to drain water and small contaminants in the sewage system. In most cases it is a product having a specially curved design.

Reference! The sale can be seen siphons having a plurality of conduits.

The curved shape of the product is used to create a water trap under the sink. Due to this the sewers do not penetrate the large remnants of contamination and also prevents penetration into the room odors from sewage systems.

Despite the abundance of different models, all of them can be divided into two options:

1. Bottle. Installed in the event that there is no shortage of space.
2. Knee. The most common option. To establish such a model is possible even in the case where the space under the sink is very limited.

Various materials are used for the production of current models: PVC, propylene, brass. But the manufacture of the material does not affect the function and service life of the product, with the option of brass has a higher cost. Therefore, it makes sense to set in when the room should be more aesthetically stylish design.

In addition, embodiments of the plastics have several advantages - they have higher strength, and also have a lower weight, which helps prevent occurrence of excessive stress on elements plumbing.

Regardless of the manufacturing material, all devices have a similar structure. Standard features often include:

1. Protective grille. It is necessary to prevent large particles of food into the sewer system.
2. Stopper of rubberized material. Necessary to seal the drain opening. The best models rubber stopper may be absent.
3. Laying. It is placed between the outlet and sink.
4. Pipe. Needs for water drainage. There are models that have an additional outlet. You can connect a washing machine or other appliances.
5. Gasket for outlet.
6. Nut for nozzle.
7. The connecting screw. Quality product is equipped with a screw made of stainless steel, because the low-cost version of the iron corrode. This significantly reduces the service life of the device.
8. Housing. It can be knee or bottle option.
9. Cap. Necessary to clean the siphon of various contaminants.
10. Sewage removal. Depending on the model, it can be formed as a corrugated tube, plastic tube, plastic tube.

Reference! To determine that the connecting screw is made of quality materials, the purchase of the product, check it with a magnet - stainless steel alloy is not the magnet.

The process of siphon assemblies for the kitchen sink

Each model has a product assembly instructions. This greatly simplifies assembly and installation process. Therefore, to cope with it any person, not even have minimal experience with plumbing devices. However, in order to avoid the emergence of various problems in the future, it is important to observe the correct execution of each stage of assembly. It looks as follows:

1. On the sink hole must install the safety net, as well as the sealing gasket.
2. Rubber gasket should be placed on the tide of the inlet pipe.
3. When screws help supplied with your computer, the safety net should be carefully fixed to the siphon pipe.
4. At the bottom of the sanitaryware article you need to fix the retaining nut and the rubber gasket.
5. Transfer tube located in the body of the device, after which it must be secured by a nut.
6. Cover and gasket must be screwed to the sanitary products.
7. Onto the spout install the rubber gasket.
8. The junction pipe and sewer pipes should be secured with a nut.

Attention! When buying a trap, carefully check the product. It should not have various defects: burrs, roughness, roughness.

How to assemble the siphon with overflow

Some models are additionally equipped with siphon overflow system. It allows you to avoid flooding the room in case of device failure. The system is a corrugated tube, which should be placed on the opposite side of the shell. It is mounted in front of the drain hole. The second end of the product is installed in the drain pipe. For fixing the overflow must use the supplied nuts.

After installation, it is important to check the tightness of the system. To do this, fill the sink with water and check the flow of fluid in the overflow. If there are leaks, should be added to reach all the nuts on the joints.

Now that you know how to build and install the sink trap in the kitchen. Subject to all steps of the installation installation will not cause you difficulty.