Folding table with his hands what is necessary for the independent production, embodiments of folding tables.

In small apartments, each centimeter of usable space on a row, so many are thinking about building a folding table, which can be removed when unnecessary. Make this versatile thing alone will not be easy, even a novice master, if competently approach to the process. It is important to purchase all the necessary materials to prepare the tools and to determine the size of the structure. We have prepared material with step by step directions for assembling folding table.

What is necessary for the independent production of table

First of all consider what tools you may need:

• hacksaw with wide teeth on wood;
• sandpaper, rasp;
• Mallet - Rubber Mallet;
• simple hammer;
• drill with drill bits required diameter;
• chisel;
• screwdriver;
• Knife construction;
instagram viewer
• plane;
• miter box;
• pliers;
• Metal shears if it is assumed the use of aluminum profiles;
• ruler or tape measure;
• pencil;
• building level;
• Area;
• perforator if mount structure to have a concrete or brick wall;
• jigsaw - will greatly facilitate the work of sawing planks and bars.

If you plan to paint or cover the table stained with paint, it is desirable to have on hand painting tools - brush, roller.

Once the tool is assembled, you can start preparing the material:

• plywood sheets of 12mm thickness - they are strong, durable, practical, working with this material is much easier in the regeneration countertop than or furniture board with a shield;
• block of 5x5 cm;
• board, if you can not buy plywood;
• seating area and fasteners;
• door hinges;
• wood stain, paint or varnish - depending on what kind of finish is intended.

Options folding wall tables

Variants of this design weight. If the cause is taken the novice master, then the variety is better to choose the easiest to manufacture folding table, but it should ideally fit into the interior of the room.

How to make a folding table with a focus on its hinges

This is one of the simplest designs that can be collected for 2-4 hours. All parts are cut from a piece of plywood or chipboard. We need:

• worktop;
• strap;
• panel, which will be attached to the wall;
• Stand for supporting tabletops triangular shape.

Production versions of this model folding table a few:

• the stand can be built out of the board, but it should be understood that all the components should be ideally suited to each other in size;
• as a material for the support to apply the bars;
• triangular cut piece from a single sheet of plywood.

Instructions for the implementation of the process is as follows:

1. On the veneer cause marking. The countertop is better to make a semi-circular shape, with no sharp corners. For this strap of constructing improvised dividers, which form a semicircle of the desired diameter.
2. With the help of the jigsaw cut the element and process end to a perfect smoothness - for this, use sandpaper or a sander, if any.
3. The next step should be to cut the support triangle of a certain parameter. If desired, it is possible to decorate, drilling a plurality of circular holes of different diameter. It needs a tip on a drill "crown" for this process.
4. Now we need to prepare the bar, which will be attached to the wall. This table-top element and the triangle will be fixed later. The panel should be processed and ennoble.
5. If you plan to mount the table top at the piano hinges, it is necessary to cut element the desired length using a hacksaw for metal.
6. All prepared items to decorate pre-treating them with antiseptic and ground wood.
7. Try on all the items and put a mark.
8. Then you need to fasten the wall plate with the help of the dowel nails, be sure to check the level of the horizon.
9. For wall panels with hinges "butterfly" attach triangular element.
10. The final step is the installation of countertops on piano hinges.

Table is ready for use. Depending on the material used, a table in slozhonnom able to protrude from the wall on its thickness.

How to make a rectangular table with folding mechanism

This model is much more complicated, so before starting the assembly should make a detailed drawing, with all sizes. In such a table when folded will protrude from the wall by about 6 cm.

The work was performed as follows:

1. Drank all the details according to the drawings.
2. Remove all the angles and process until smooth.
3. Try on all the details, and decorate all of the elements.
4. At the bottom of the countertop to make components perform markup.
5. Now it's time to build a table. Each element should be well before twisting promazyvat joiner's glue in the joints.
6. Once the design is ready, it can be mounted on the wall and check the folding mechanism on the performance.

IMPORTANT! When assembling this construction must be very careful, table elements must be secured by level to obtain a flat surface.

Making a table with fold-out stand

It's pretty overall design in the unfolded state, so before its installation should be carried out all the necessary measurements. When folded, the table will be speaking on the wall surface by 18 cm. Cooking elements:

• rack feet - 4 pcs .;
• bridge connecting the legs - 4 pcs .;
• mounting rack - 1 pc .;
• worktop - 1 pc .;
• loop butterfly;
• Supporting rails - 2 pcs.

performing assembly algorithm is as follows:

1. Prepare 8 elements of the bar - the legs 4 and 4 bar.
2. Can combine elements using dowels which are pre-lubricated joiner's glue 2 frame.
3. The resulting frame to interconnect furniture hinges, their need 2 pcs.
4. Then, the design with hinges fasten the support bar, which is subsequently mounted on a wall anchor nails.
5. Once everything is ready, on the 2 sides of the construction must be secured to the wall supporting triangles connected place fluff joiner's glue.
6. Cut worktop of the selected material. Corners are rounded on one side, to treat skin.
7. For table-top with hinges fasten the bar, which will cover the support mechanism.
8. The finished structure set on the support brackets and secure with screws.
9. Zadekorirovat product pre-treating it with special structures for increasing the wear resistance and water resistance.

Table is ready, you can check the gear and decorate the product to your liking.

From the foregoing, it is clear that if you follow the instructions for assembly, mount the small folding table with fastening will not be difficult. Stock up on tools, materials, patience and start manufacturing.