Repair bathroom includes several stages. In this case, it does not consist only of the interior decoration. An important point in carrying out repair works - is the installation of all the elements so that they feel comfortable and convenient to use each of the households.
These elements primarily relates to the shower mixer, and the main point is the height of installation of the pallet. This parameter depends on a variety of nuances, but most importantly - it is individual preferences of users and type of crane. But there are certain rules exist, how to choose the distance and at what height you need, and can be mounted faucet? On this later.
Fitting Standards shower mixer
The content of the article
- Fitting Standards shower mixer
- From which the height of the mixer unit depends
- Recommendations for choosing a height for the installation of the mixer
Practically all the cranes, which are commercially available with instructions for installation. It lists all the default settings and installation procedure are listed. This simplifies the installation process and enables it yourself without the help of professionals.
Before you are ready to install a new faucet, it is necessary to dismantle the old, if it exists. But before the new mount, it should be remembered that there is a certain set of installation tips. All of them are documented and can be found in the SNIP 3.05.01-85.
The document clearly stipulates that the distance selected according to individual preferences, but the recommended installation height of the water intake valves on the bath or shower tray is 180 centimeters.
Reference. It is worth noting that this figure is more suitable for public baths or showers (for example, in the locker room of the gym or sports center), rather than for a private shower.
For home use, the height of the mixer to the ground is better to choose in the range of 200-210 centimeters. If we consider the interval from the floor, it must be 215 (plus / minus 10) centimeters.
If the valve is not mounted in a fixed point, and on the bar, you get the ability to adjust the parameter for each user personally. The upper edge of the bar is set at the same distance - 215 cm from the base of the bath.
Hand shower with a small spout lengths better set at a height of 30-70 cm from the top edge of the bowl. It is important to remember that in this case, the distance will depend on the length of the hose.
If you perform the installation of a side shower, the height of the entire system depends on the number of taps in the kit. If there are two, the optimal spacing will be 70-130 centimeters from the base of the shower stall. If you complete three cranes, it is better to choose the height of the pallet following:
- 60;
- 100;
- 140 centimeters.
All these parameters are recommendations only and are not restrictive.
Reference. According to the norms SNIP sink is best mounted at a distance of 85 cm from the floor. However, this value is only advisory in nature, and is calculated on the basis of the average human height.
From which the height of the mixer unit depends
It is important to note that all figures mentioned above are only advisory in nature. After all, the room and the requirements of different users differ from one another and are unique. For this reason, the crane will always be different mounting height. This parameter, and the method of installing itself depends on various factors. One of them - the type of mixer.
Each of them must be mounted at different heights (as indicated in the previous paragraph). If two cranes are set for bathtubs and sinks (ie. e. for each of their bowls), the mixer that you will use for a bath only, can be mounted at a distance of 20-25 cm from its top edge.
If for both devices you plan to use only one tap (with spout great length), the mounting height above the upper rim bath should be at least 30 centimeters. Set above the sink faucet is recommended at least 25 cm away from its upper edge. This height is optimal, so that the consumer could no problem to wash your hands, wash and perform the entire set of hygiene procedures.
Recommendations for choosing a height for the installation of the mixer
When you install the sink is important to choose a height to suit each individual tenant. However, when calculating remember a few rules, which play an important role in the future. Some of these rules include:
- Prior to installation in the chosen location must be applied to the mixer wall. So you can see whether the spout prevents, to estimate the location of the device, and to conclude, whether specifically for you this comfortable height.
- Do not take the reference point for mounting the floor, since the length of legs bath is not constant and may vary depending on the model. On top of that some users are placed under the legs of a variety of items to stabilize. This leads to the fact that the height can be verified "fall" and you will not be comfortable to take a shower after the crane installation.
- Before installation, make absolutely all measurements. The distance from the floor, as well as the lower and upper edge of the bowl. So you eliminate any shortcomings.
- The height depends on a set of various accessories.
- When installing the faucet, make sure that it is not fixed to the curb tiles. In such a case the mixer is loosely fixed.
By following these simple rules for choosing the height, you can make it so that the tap in the bathroom will last for many years, and its operation will not cause discomfort.
