How to disassemble the shower: the removal of the doors, the dismantling of the side rails, the frame disassembly

click fraud protection

shower cabins have already come into our everyday life. Knowing how they need to be disassembled, you can always refuse the services of a professional plumber if there is a need to repair the unit or even disassemble it. Who knows what the future hold for us? It may be necessary to move, then that will be useful to dismantle skills. Why would anyone want to pay? You can save a little budget.

Preparatory work

The content of the article

  • Preparatory work
  • How to dismantle the shower with his own hands
    • Removing doors
    • Dismantling of the side walls
    • frame disassembly
    • Analysis of the pallet

No matter how modern and reliable device may be, sometimes there comes a time that requires a professional approach to dismantling. Possibly in need of repair or are scheduled to move, or maybe just want to change the sealant.

Undoubtedly, in the process of collection of complex technical devices at some point you just want competent help from outside. But dismantling - not to collect, this is quite possible to cope on their own. Thus there is no need for any special tools.

instagram viewer

Of all the tools that will be useful for the work will be needed:

  • knife;
  • screwdriver;
  • means for removing sealant.

Before starting to disassemble the shower, it should wash, all the drain water, then rub the entire surface, and other elements.Dismantling shower.

How to dismantle the shower with his own hands

Before starting to disassemble everything, you need to clean up all the silicone sealant. To this end, a special tool is used. Of course, it is possible to use a knife, but it can scratch the plastic.

Reference! All processed composition for removing silicone joints, it is necessary to disassemble for fifteen minutes. Otherwise, it means erode, and the work will have to be repeated.

Many "professionals" recommend to clean the sealant using gasoline or other solvent, in cases where there is a special composition. This can be done if the throw cabin plan. It is better to use an ordinary knife, because it does less harm.

Disassemble the cabin to start from the door. And then remove the side walls, and then to engage the frame and tray.

Removing doors

The device is completely identical to all the doors in showers. The upper and lower side has a stop for the rollers, under them are rails on which they move.

To remove the door, you need to roll out the fixing screws of the upper rollers, as soon as palpable backlash can squeeze out the door outside the board guide. The lower part then easily pull out of the slot. After that, the door need a little pick up and squeeze into the cockpit.Rollers.

Attention! The doors are made of thick glass, the last tempering. Therefore, they are quite a lot of weigh. One will be hard to cope with their dismantling. Help partner will be most welcome.

All actions during the removal of the doors should be done particularly carefully. Glass elapsed hardening, cracks easily, even from minor bumps.

Dismantling of the side walls

Despite the fact that the side walls are easy to assemble, remove them very uneasy. They are inserted into the grooves of the side profile of the carcass, a convert to the wall. On the other side they are supported at the center rack. The top and bottom are recorded fasteners.

First of all, it is necessary to remove the retaining fixture. Then unscrewed the screws that hold the rack in the center and it is moved to the center of the cabin. Now walls can be pulled out from the side of the slot and push them inside the cabin.

At the speed of silicone can affect. It would be better to remove. This is easily done with a knife. The main thing is to treat the surface by the metallic elements, and not vice versa.

frame disassembly

First of all, you need to unscrew the locking fastener that holds the partition on the frame, the pallet and the ceiling. Next cleared sealant on all joints. Now you can remove the top half of the body.frame disassembly.

To make it easier to disassemble the frame, it is recommended to remove it from the pan.

Attention! If the two people take part, the frame can be removed directly from the side walls. So it will be easier for them to be dismantled.

Once the sealant is removed, it will be possible to remove the sidewall, not forgetting to remove the screws that hold them on the arcs. Thereafter, clamps are removed from the guide wall. Here we must be especially careful and cautious, it is important not to damage the slots in the screws and other elements of the case. The upper and lower arc fastened with screws to the wall of the guide. With the help of screwdriver or a rechargeable screwdriver, you can easily get rid of these fasteners.

Once the frame is removed, you can remove the back wall from the pallet.

Analysis of the pallet

Well, if the cabin tray stands on the frame or on the floor. But if it is installed on the concrete floor, it is an entirely different question. Will have to sweat and some dirty. Whatever it was, you must first remove the sealant, and then remove the protective strip, which is attached along the bottom of the bottom. If the pallet is standing on the frame, it can be easy to push.Analysis of the pallet.

In the case of low-pan installation in screed, you can try to tear it away, as soon as the protective tape is removed. In this case, could have a considerable help to the usual mount for the car. These are available in almost every household. But you need to do everything very carefully.

We must not forget that the bottom of the hull is made of plastic, but it is more brittle than metal. When will be able to separate the pallet and the frame, it must be removed away. To remove the carcass from the coupler, will have to work a little punch, switch it to a jackhammer mode.

Often set in mortar high tray decorated with tile or screen. If there is not much self-confidence and experience, it would be better to seek help from a competent expert.

Not bad helps in the process of dismantling instructions for cabin assembly. This document comes in the package and drawings can give a detailed picture of how and what is connected. Accordingly, much easier to carry out works in the reverse order. The main thing is not to hurry, be careful and accurate.

Why you can’t leave towels in the bathroom: what else should not be left in the bathroom

Why you can’t leave towels in the bathroom: what else should not be left in the bathroomBath

Some items that are designed for use in the bathroom and stored in the same place can seriously suffer from the humidity in this room. Moreover, some of them, such as towels, can even become hazar...

Read More
Why can’t you put refreshing cubes in the toilet bowl? Is it possible to do it yourself?

Why can’t you put refreshing cubes in the toilet bowl? Is it possible to do it yourself?Bath

Every good housewife plumbing sparkles clean.And how nice it is to go to the toilet when it smells of freshness! What tricks we do not go to achieve the desired purity! All kinds of tablets for ci...

Read More
Why are there no bathtubs in American apartments?

Why are there no bathtubs in American apartments?Bath

If you have ever traveled abroad, for sure many home decoration, lifestyle and traditions have surprised you. A lot of things familiar to us are perceived quite differently in America and the coun...

Read More
Instagram story viewer