Most likely, for any "real man" will not be opening that appears one of their amazing property when working with screws and other small things. The property is at times borders on magic - they manage to hold on when it is not necessary, but at the right moment, on the contrary, fall.
It does not matter if you just fall, do you strive to somewhere rolled away and get lost. One, two, three. When the tenth disappears from view, working spirit disappears somewhere, like a neighbor's cow came and tongue licked. And to avoid that help screwdrivers with magnetized tips. And not necessarily rush to the store in search of just such a model, it is possible to magnetise any screwdriver that there is in the economy.
Magnetizer for a screwdriver and not only
The content of the article
- Magnetizer for a screwdriver and not only
- Magnetization screwdriver own efforts
The magnetic properties of the tool much easier life. I have the confidence that no one, even the smallest screw will not fall out and not get lost. In any case, it will remain on the tip of the instrument.
But there are also situations where it becomes a "disservice." If you work with electronics, the magnetized tool can have a negative impact. This led to what was invented so-called magnetizer.
The principle of this device is very simple, yet very effective. It allows you to quickly put any screwdriver properties of the magnet, and if necessary - to get rid of this effect. Very simple in design and operation to the device allows you to magnetize tip:
- screwdrivers;
- scissors;
- self-tapping screws,
- screws;
- screws.
In fact, any metal object can be given magnetic properties. Due to the fact that the device does not require mains or extra charge, it can be used in any environment. To a large degree this contributes to the compact size. In this case, no special knowledge or skills do not have.
The housing structure consists of a polymer. Placed inside the two magnets. Two holes, that are on the body allow to attach the magnetic properties or, conversely, to demagnetize. To avoid confusion, some are meant to do all the holes are marked accordingly.
If positioned inside the corresponding holes screwdriver or other object from metal, it will be magnetized. If these magnetic properties are no longer needed, the subject is placed in the other hole. In the case except for the bit screwdrivers nothing else is required of the magnet, it is necessary to acquire a device having small slits. From this and the cost varies.
In addition, a small hole affects the proximity of the magnet arrangement, and accordingly, the strength of their influence. Converse is also true for the larger tool or fasteners need device having larger apertures.
In fact, the entire device - a small piece of plastic with two holes, and sometimes with one and two magnets. Small size, light weight - all this allows you to use the device not only in the studio, but also easy to transport it. The cost of the product is low, usually no more than six hundred rubles, but some models are worth a lot more.
Magnetization screwdriver own efforts
If the need for the magnetic properties of an instrument does not occur very often, it is not much point to purchase a special tool. To spend money for the sake of just been - is inappropriate. So how do the magnetic tool if a suitable device is not at hand?
Correct position is a powerful magnet - quite a few times to hold them on the surface of the object, starting from the middle part to the end. The main thing - try not to affect the places that are close to the handle of the tool. If the practice is often required to keep on hand tool with magnetic properties, enough to attach to it a magnet and so stored.
Attention! It should be noted that the use of a very strong magnet not only did not improve the situation, but it can also cause harm. No, not the most screwdrivers, and the instrument with which the work will be done. Possible breakdowns and interferences, and this has a negative impact, especially when it comes to electronics.
The truth of life - not always the case that the correct screwdriver is available, and certainly no magnetizer. Here it is possible and necessary to remember high school physics course, because a simple magnet, powered by electricity, can be assembled by hand. With such a device, to give magnetic properties can be any subject of steel.
The easiest way to be wound onto an object such as a screwdriver on the same paper, on top of which is located a couple of hundred turns of copper wire coated with lacquer. Get a simple coil, if the file on her electric charge. To do this, you can use any battery or the battery or the charging of a cell phone. This will create a magnetic field. If the turns will be larger, and the magnet is possible to build more powerful, well or return to the old factory magnetism magnet.
and conventional electric network can be used to generate a magnetic field. Only in this case, the need to add a homemade coil and fuse with a small nominal value. However, it can be replaced and a thin wire. its thickness should be in the range of 0.1 to 0.15 millimeters.
After supplying a current fuse will be burned (not superfluous to fuse cover or that it be replaced with paper), in any case time will be sufficient to influence of a powerful magnetic field to magnetize the surface of the object, which is placed inside coil.
Attention! Make similar experience at home is possible only if is given a full report to the likely consequences and has the relevant experience and skills.
More simple and safe solution - is to buy a special device that is easy to keep at home or at work and it is to them and use as needed. It should be remembered that the tool having a strong magnetic properties, is harmful to electronic equipment.
