What if the building material filled with foam

click fraud protection

Content

  • 1 method 1
  • 2 method 2
  • 3 method 3

Quite often people do not even think about the safety of their building materials. Improper storage can lead to a rather unfortunate consequences. First of all, you must understand that you need to look and then how to store various materials for construction. Among other things, quite often there are situations when the balloon during use of the foam, the liquid falls on construction materials. In this case, many people simply do not know what to do in such a situation. Despite the seeming hopelessness there are at least a few ways to solve this problem.

method 1

First of all, it is necessary as soon as possible to take any action. In that case, if you notice that a small piece of foam hit the material, you need to try as soon as possible to remove it. For this will be enough to take a simple cloth or sponge and remove any residual foam. However, you should understand that it should be done as early as possible, because the foam hardens very quickly and deal with its consequences is becoming much more difficult.

instagram viewer

method 2

The following method is already fit in if the foam stiffened. In this case, you'll need an ordinary blade. We need to take it carefully and cut in small foam layers. Try to do it in such a way so as not to come into contact with the material. When the layer will be very thin, you will need a slight movement to try to scoop the leftovers. Note, however, that such embodiment need to use precision if the material is coated with a layer of lacquer or paint.

method 3

The next way is almost a radical solution to the problem. In order to remove the cured foam, you can use any solvent. For its application, it is necessary to take posudnuyu sponge, which is soft on the one hand, and on the other a coarse. On the soft side we put the solvent and use it on the foam. Before transgress e is the procedure you need to cut off the top layer. When the foam begins to dissolve, its remains you can erase the rough side.

In addition, you can always use a special tool to remove the foam, which is sold in any hardware store. Just with the task copes Dimexidum, which can be purchased at the pharmacy.

How to wash the surface of the material from the foam easily and quickly

How to wash the surface of the material from the foam easily and quicklyWith Your Own Hands

Many construction and finishing operations are carried out using construction foam. Its ability to fill and seal various openings is ensured by incredible adhesion to any type of surface. In addit...

Read More
How to repair a cracked floor screed

How to repair a cracked floor screedWith Your Own Hands

The problem of restoration of concrete floors is especially popular among owners of old Khrushchevs. The surface's ability to wear and crack will inevitably render it unusable. The concealment of ...

Read More
How to cut or drill a tile laid on a wall

How to cut or drill a tile laid on a wallWith Your Own Hands

Tile is a great material for decorative wall covering, but the main difficulty is that it is difficult to work with after laying. Sometimes it may be necessary to trim the edges or joints of the t...

Read More
Instagram story viewer