What is the aerator mixer: Why do I need an aerator

Rising prices for utilities is forcing consumers to save on resources consumed. Manufacturers plumbing and marketers take into account this desire and offer to buy a variety of wonderful devices. For example, an aerator.

According to the manufacturer, this device is able to save up to 50% of water consumed. But is it real or just another marketing ploy manufacturers?

What is aerator, its features

Aerator - a special device in the form of a miniature mesh filter which is installed on faucet spout. It is necessary to saturate the water microparticles air - aerate it. Also, it is often referred to as "lens", as he shares one jet, coming into the mixer, a few more subtle.

The device consists of the following elements:

1. Housing. Usually it is made of thin metal, brass, bronze or plastic. Metal products do not differ durability, because during the operation on the surface accumulates limescale deposits. They are also susceptible to corrosion. Therefore, experts recommend the purchase of brass fixtures, bronze or polymers. They are not afraid of moisture, so will last you for years to come.
   instagram viewer
2. Filter. It is necessary for further purification of fine dirt and dust.
3. Mixer. The perimeter member arranged small openings through which the particles enter the air to the aerator. Then the device mixes the air bubbles with the water.
4. Outer screen. The device "breaks" one jet into several thin streams.
5. Bushings, seals. They provide all connections for tightness.

Reference. Aerators are the highest quality, made of brass and bronze. However, the cost of such products is higher than that of the plastic and metal devices.

With the help of the aerator mixer is able to create different types of jets:

1. Aerated. The feed stream of soft, three-dimensional. Spray no.
2. Laminar. Feed dense, intense.
3. Spray. Feed forms a large number of thin streams.

Why do I need an aerator

People familiar with foreign languages, can see the similarity of the device name and the Greek term "aeration", which stands for "air". This non-random similarity, because device is designed to mix air bubbles and water flows.

This is necessary to reduce water consumption without changing the flow rate. In simple words, a nozzle with a mesh, which is mounted on the spout of the mixer, it is necessary to save.

Reference. According to the manufacturer, saving discharge water may be greater than 50%.

On average, for one minute it flows through the mixer of about 15 liters of water. Aerator reduces this value to 2.5. This is achieved by the fact that passes through the device, the flow of water saturated with air bubbles. Because of this, the jet becomes more bulk, so the pressure drop remains unnoticed.

savings - not the sole function of the device. Also, the product prevents splashing. Water mixed with air bubbles, it is similar to foam. Due to this it "wraps" the object that you wash. In this case, you will not feel a lack of water volume or air flow using a mixer equipped with an aerator.

Also, the merits of the device include the reduction of the chlorine content in the water. This is due to the fact that during the passage of the jet through the device, the air molecules bind to the particles and outputting the residual chlorine molecules.

oxygen bubbles contribute to a better removal of dirt, fat: detergents and cleaning agents, are more active in the gaseous medium. In addition, large particles of debris, dirt, fat lime deposits accumulate on the filter, without falling into the liquid stream.

Reference. Mixer with aerator not only saves water, but also improves its quality.

Plumbing apparatus has a number of advantages:

• to reduce water consumption;
• improves its quality;
• It reduces the noise level at an output stream from the mixer;
• It has a low cost;
• easy to install and maintain.

Reference. Experts recommend changing the aerator once a year. If the water pipes are old, replace the device to the new should be every six months.

What are the aerators

Plumbing aerators are several varieties. Classify them according to the method of installation and operation principle.

Depending on the type of installation

Wiring method conditioned feature mixer design: setting device where location of the threaded connection. This should be considered when purchasing a product.

For example, the following types of aerators:

1. With external connection. Such a model is fixed to the inside of the mixer using Allocated thread. In most cases this method of installation is chosen due to its invisibility. No one will see that the optional valve device.
2. With internal connection. It is also installed on the surface of the "nose" of the mixer. Mount such a model makes sense in two cases: if you're a fan of massive plumbing, which is matched to the design of the room. Or to pre-bought a mixer, which the aerator is out of order. Such a device will not be able to disguise, it is strongly evident. But it has a huge advantage - it is better to cope with their tasks, rather than its "brother". In addition, it is relevant if the pipes high pressure - long stretch without repairs or complete replacement.

Depending on the design features

There are two options:

1. Disk. They create a thin jet of water by means of a disk whose surface is dotted with many tiny holes. On some models, it has the form of a grid. The disc can be mounted on an inner or outer portion of the article.
2. Crevice. The body of the device is a special membrane. Under the pressure of the incoming water it flexes, whereby its diameter formed by the slit. Through them, the water flows. In the center of the jet there is a gas space, saturating the air bubbles.

Modern technology offers a lot of things, intended to facilitate our lives, to make it more comfortable. One such device is an aerator tap. The mixture of water and air more efficiently removes impurities, while reducing water consumption. The original model can be a stylish addition kitchen or bath.